Sony RDPXF100IP User Manual

RDP-XF100iP_4-182-698-13(2)_U2

The model number and the serial number are located on the 
bottom.
Record the serial number in the space provided below. Refer to 
them whenever you call upon your Sony dealer regarding this 
product.

Model No. RDP-XF100iP

 
Serial No.  _______________________________

For customers in the USA

Please register this product on line at 

http://www.sony.com/productregistration

Proper registration will enable us to send you 

periodic mailings about new products, services, 

and other important announcements. Registering 

your product will also allow us to contact you in 

the unlikely event that the product needs 

adjustment or modification. Thank you.

expose this apparatus to rain or moisture.
To reduce the risk of fire, do not cover the ventilation of 

the apparatus with newspapers, tablecloths, curtains, etc. 

And do not place lighted candles on the apparatus.
To reduce the risk of fire or electric shock, do not expose 

this apparatus to dripping or splashing, and do not place 

objects filled with liquids, such as vases, on the 

apparatus.
Do not install the appliance in a confined space, such as a 

bookcase or built-in cabinet.
Do not expose the batteries (battery pack or batteries 

installed) to excessive heat such as sunshine, fire or the 

like for a long time.
As the main plug is used to disconnect the unit from the 

mains, connect the unit to an easily accessible AC outlet. 

Should you notice an abnormality in the unit, disconnect 

the main plug from the AC outlet immediately.
The unit is not disconnected from the AC power source 

(mains) as long as it is connected to the wall outlet, even 

if the unit itself has been turned off.
The nameplate and important information concerning 

safety are located on the bottom exterior of main unit 

and on the surface of AC power adaptor.

 

You are cautioned that any changes or modifications not 

expressly approved in this manual could void your 

authority to operate this equipment.

Danger of explosion if battery is incorrectly replaced. 

Replace only with the same type.

This equipment has been tested and found to comply with the 

limits for a Class B digital device, pursuant to Part 15 of the 

FCC Rules. These limits are designed to provide reasonable 

protection against harmful interference in a residential 

installation. This equipment generates, uses and can radiate 

radio frequency energy and, if not installed and used in 

accordance with the instructions, may cause harmful 

interference to radio communications. However, there is no 

guarantee that interference will not occur in a particular 

installation. If this equipment does cause harmful interference 

to radio or television reception, which can be determined by 

turning the equipment off and on, the user is encouraged to try 

to correct the interference by one or more of the following 

measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different 

from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for 

help.

• Replace the battery for the remote commander with a 

Sony CR2025 lithium battery. Use of another battery 

may present a risk of fire or explosion.

• Battery may explode if mistreated. Do not recharge, 

disassemble or dispose of in fire.

• Dispose of used battery promptly. Keep away from 

children.

1)  Read these instructions.

2)  Keep these instructions.

3)  Heed all warnings.

4)  Follow all instructions.

5)  Do not use this apparatus near water.

6)  Clean only with dry cloth.

7)  Do not block any ventilation openings. 

Install in accordance with the manufacturer’s instructions.

8)  Do not install near any heat sources such as radiators, heat 

registers, stoves, or other apparatus (including amplifiers) 

that produce heat. 

9)  Do not defeat the safety purpose of the polarized or 

grounding-type plug. A polarized plug has two blades 

with one wider than the other. A grounding type plug has 

two blades and a third grounding prong. The wide blade 

or the third prong are provided for your safety. If the 

provided plug does not fit into your outlet, consult an 

electrician for replacement of the obsolete outlet.

10)  Protect the power cord from being walked on or pinched 

particularly at plugs, convenience receptacles, and the 

point where they exit from the apparatus.

11)  Only use attachments/accessories specified by the 

manufacturer.

12)  Use only with the cart, stand, tripod, bracket, or table 

specified by the manufacturer, or sold with the apparatus. 

When a cart is used, use caution when moving the  

cart/apparatus combination to avoid injury from tip-over.

13)  Unplug this apparatus during lightning storms or when 

unused for long periods of time.

14)  Refer all servicing to qualified service personnel. Servicing 

is required when the apparatus has been damaged in any 

way, such as power-supply cord or plug is damaged, liquid 

has been spilled or objects have fallen into the apparatus, 

the apparatus has been exposed to rain or moisture, does 

not operate normally, or has been dropped.

Perchlorate Material –special handling may apply, see 

www.dtsc.ca.gov/hazardouswaste/perchlorate  

Perchlorate Material: Lithium battery contains perchlorate

Nickel Metal Hydride batteries are 

recyclable. You can help preserve our 

environment by returning your used 

rechargeable batteries to the collection 

and recycling location nearest you.

For more information regarding recycling of rechargeable 

batteries, call toll free 1-800-822-8837 or visit  

http://www.rbrc.org/

 Do not handle damaged or leaking Nickel Metal 

Hydride batteries.

The validity of the CE marking is restricted to only those 

countries where it is legally enforced, mainly in the countries 

EEA (European Economic Area).

• Compatible with iPod®/iPhone®

• FM tuner with 20 station presets

• Rechargeable battery for portable use

• Audio in function

• Wireless remote commander supplied

• Play the unit on the power source specified in 

“Specifications.”

• To disconnect the AC power cord (mains lead), pull it 

out by the plug, not the cord.

• Since a strong magnet is used for the speaker, keep 

personal credit cards using magnetic coding or spring-

wound watches away from the unit to prevent possible 

damage from the magnet.

• Do not leave the unit in a location near a heat source 

such as a radiator or airduct, or in a place subject to 

direct sunlight, excessive dust, mechanical vibration, or 

shock.

• Allow adequate air circulation to prevent internal heat 

build-up. Do not place the unit on a surface (a rug, a 

blanket, etc.) or near materials (a curtain) which might 

block the ventilation holes.

• Should any solid object or liquid fall into the unit, 

unplug the unit and have it checked by qualified 

personnel before operating it any further.

• To clean the casing, use a soft cloth dampened with a 

mild detergent solution.

• Wipe the battery with a dry cloth to assure a good 

contact.

• Be sure to observe the correct polarity when installing 

the battery.

• Do not hold the battery with metallic tweezers, 

otherwise a short-circuit may occur.

If you have any questions or problems concerning your 

unit, please consult your nearest Sony dealer.

4-182-698-13(2)

Personal Audio  

Docking System

RDP-XF100iP

©2010 Sony Corporation          

Printed in China

Operating Instructions

Charge the rechargeable battery before using this unit for 

the first time, or when the battery is depleted. You can 

operate the unit while charging.

Connect the AC power cord (supplied) to the AC 

power adaptor (supplied).

Connect the AC power adaptor to the 

 

jack on the back of this unit firmly and plug it into a 

wall outlet.

• Use the Sony supplied AC power adaptor only. The polarity of the 

plugs of other manufactures may be different. Failure to use the 

supplied AC power adaptor may cause the unit to malfunction.

Confirm that charging has started.
When charging start, the battery indicator appears. 

While charging, the charging indicator animation 

loops.

When charging completes, the full battery indicator 

appears for a while, and then disappears.



• If you connect the AC power adaptor when the battery is fully 

charged, the full battery indicator appears for a while, and then 

disappears.

• If you connect the AC power adaptor when the battery power is low, 

charging starts and the low battery and charging indicator 

animation loops.

The unit cannot perform operations without the AC 

power adaptor while the low battery indicator 

appears.

 

When charging completes, the full battery indicator 

appears.

• It will take approximately 7 hours to charge the battery.

You can operate the unit with the rechargeable battery 

instead of the AC power adaptor.
Note

• The maximum output will be lower when the AC power adaptor is 

disconnected.

The remaining power of the battery will be indicated 

when the unit is turned on. As the remaining battery 

power depletes, the battery indicator decreases.

When the battery becomes almost fully depleted, “LOW 

BATT” flashes and the unit will turn off. To charge the 

battery, connect the AC power adaptor. ( See “Preparing 

a power source.”)

 

• The remaining battery power will not be indicated when the unit is 

turned off.

• The unit requires at least 30 minutes to charge the battery if “LOW 

BATT” appears.

• The battery indicator shows approximate remaining battery power.

• Operating conditions will affect the rate of battery depletion.

Playback of iPod

approx. 7hours*

FM reception

approx. 7hours

Measured in accordance with the JEITA (Japan 

Electronics and Information Technology Industries 

Association) standard.

* Playback time measured using a fully charged rechargeable battery 

with a fully charged iPod classic.

Repeated recharging causes the capacity of the 

rechargeable battery power to decrease over time. Replace 

the rechargeable battery pack when its capacity becomes 

half the usual time, even after charging the battery fully.
Note

• The rechargeable battery pack is not a commercially available 

product. To purchase a rechargeable battery pack (NH - 2000 RDP), 

consult with your nearest Sony dealer.

Slide the latch to 

, and slide 

 in 

the direction of the arrow on the bottom of this unit.  

The battery compartment cover opens, then remove 

the cover.

Use a coin, etc., to pull out the rechargeable battery 

pack.

Remove the rechargeable battery pack and disconnect 

the lead from the jack inside the battery compartment.

Connect the lead of a new rechargeable battery pack 

to the jack and insert the battery in the unit.

Close the battery compartment cover and slide the 

latch to 

.

• Charge a new battery pack before use. See “Preparing a power 

source” for details.

• Turn off the unit, before replacing the rechargeable battery pack.

• When replacing the rechargeable battery pack, place a soft cloth,  

etc., under the unit.

Before using the remote commander for the first time, 

remove the insulation film.

With normal use, the battery (CR2025) should last for 

about 6 months. When the remote commander no longer 

operates the unit, replace the battery with a new one.



• Do not attempt to charge the battery.

• If you are not going to use the remote commander for a long time, 

remove the battery to avoid any damage that may be caused by 

leakage and corrosion.