Sony RCD-W500C User Manual
Recording/Editing
29
FINALIZE
H
H
DECK A/DECK B
FINALIZE
DECK A/DECK B
REC FADER
Fading In and Out
recording (Rec Fader) Z
recording (Rec Fader) Z
You can gradually increase the recording level
at the beginning of a recording (fade-in
recording) or decrease the recording level at the
end of a recording (fade-out recording).
at the beginning of a recording (fade-in
recording) or decrease the recording level at the
end of a recording (fade-out recording).
This function is convenient when you do not
want the track to start or end abruptly.
want the track to start or end abruptly.
Before using the remote, set DECK A/DECK B
to DECK B.
to DECK B.
Notes
• Fading lasts for 5 seconds.
• You cannot change the digital optical output level
• You cannot change the digital optical output level
even if you make fade-in/fade-out recording.
Fade-in recording
During recording pause, press REC FADER at
the point where you want to start fade-in
recording.
the point where you want to start fade-in
recording.
“Fade In” flashes in the display, and recording
starts.
starts.
Fade-out recording
During recording, press REC FADER at the
point where you want to start fade-out
recording.
point where you want to start fade-out
recording.
“ Fade Out” flashes in the display, and the unit
fades out and changes to recording pause.
fades out and changes to recording pause.
Finalizing a CD-R or CD-
RW
RW
Finalizing completes the recording of a disc. It
enables you to play the disc on DECK A of this
unit or other players. (The CD-RW compatible
player for CD-RW playback.) When a
recording is finished, a CD-R or CD-RW must
be finalized. Once that is done, a CD-R cannot
be added or erased to. CD-RWs are locked
once they are finalized, and must be unfinalized
to permit additional recording or erasure.
enables you to play the disc on DECK A of this
unit or other players. (The CD-RW compatible
player for CD-RW playback.) When a
recording is finished, a CD-R or CD-RW must
be finalized. Once that is done, a CD-R cannot
be added or erased to. CD-RWs are locked
once they are finalized, and must be unfinalized
to permit additional recording or erasure.
When using the remote, set DECK A/DECK B
to DECK B.
to DECK B.
1
Place a CD-R or CD-RW that has not
been finalized in DECK B.
been finalized in DECK B.
Make sure that “TOC” appears in the
display. If a finalized CD is loaded, “TOC”
does not appear.
display. If a finalized CD is loaded, “TOC”
does not appear.
2
Press FINALIZE while the unit is
stopped.
Finalizing enters standby mode.
continued