Sony RCD-W500C User Manual

C12/
Cannot Copy

C13/
Rec Error

C14/
TOC Error

C41/
Cannot Copy

You are trying to record a disc that
cannot be played back in DECK-A
or with an external device, such as
CD-ROM or VIDEO CD.

• Remove the disc, and then insert a

music CD for playback.

Recording has not been completed
successfully because of vibration.

• Relocate the unit in a place free of

vibration and restart the recording
again.

The disc you try to record is
excessively dirty (such as oil-
stained or finger marked) or
scratched. Or the disc is not
normal.

• Replace the disc with another one

and restart the recording again.

The unit did not read the TOC
information.

• Insert other discs.

The sound source you are trying to
record is a copy of a commercial
music software. Or you are trying
to record on a CD-R/CD-RW
digitally.

• Because of the restriction of the

Serial Copy Management System,
you cannot record copies of
commercial music software or
MP3 files on DECK A. Neither
can you digitally record from a
CD-R/CD-RW.

• Use analog recording through the

ANALOG IN jack when you
record from other units. Or use
Synchro-Recording when you
record from DECK A. (The
recording mode is automatically
changed to analog recording.)

When the self-diagnosis function is activated to
prevent the player from malfunctioning, three
character service numbers in a combination
with a message appears in the display. In this
case, check the following table.

C71/
Din Unlock

If this message is displayed
momentarily, this is not an error. It
is caused by the digital signal
during recording.

During recording of a digital sound
source, the connecting cable has
been disconnected or the player of
the sound source has turned off.

• Connect the cable or turn on the

digital player.