Sony RCD-W500C User Manual
8
Playing a CD
This unit has two decks.
In this manual, the CD player section is just
called DECK A, and the CD-R and CD-RW
recording section is called DECK B.
called DECK A, and the CD-R and CD-RW
recording section is called DECK B.
When using the remote, set DECK A/DECK B
to DECK A to operate DECK A (the CD player
section), or to DECK B to operate DECK B
(the CD-R or CD-RW recording section).
to DECK A to operate DECK A (the CD player
section), or to DECK B to operate DECK B
(the CD-R or CD-RW recording section).
1
Turn on your amplifier and adjust the
volume to the minimum.
volume to the minimum.
2
Set your amplifier’s input selector to
select this unit.
select this unit.
3
Press POWER.
4
Press OPEN/CLOSE (or one of the DISC
1-5
1-5
A
buttons for DECK A of RCD-
W500C) and place a disc on the inner
circle of DECK A (or B). Press OPEN/
CLOSE (or
circle of DECK A (or B). Press OPEN/
CLOSE (or
A
) again to close the disc
tray.
5
For DECK A of RCD-W500C, press
PLAY MODE repeatedly to select the
Continuous play mode.
PLAY MODE repeatedly to select the
Continuous play mode.
When you
select
select
ALL DISCS
1 DISC/
ALBUM
ALBUM
Basic Operations
The unit plays
All discs in the unit consecutively
in the order of the disc number.
in the order of the disc number.
Only one disc you have selected.
6
Press
H
.
The unit starts playing. Adjust the volume on
the amplifier.
the amplifier.
To
Stop playback
Pause playing
Select the disc
(for DECK A of
RCD-W500C)
(for DECK A of
RCD-W500C)
Go to the next disc
(for DECK A of
RCD-W500C) Z
(for DECK A of
RCD-W500C) Z
Go to the next
track
track
Go to the beginning
of the current track
or the preceding
track
of the current track
or the preceding
track
Remove the disc
*AMS: Automatic Music Sensor
Tips
• You can start playing from a specific track in step 6.
1 Turn AMS while the ALBUM SELECT indicator
in the display is turned off (or press ./> or
the number buttons on the remote) to select the
track you want to play (see “Using the Display”
on page 13 for details about the displayed
information).
the number buttons on the remote) to select the
track you want to play (see “Using the Display”
on page 13 for details about the displayed
information).
2 Press H.
• You can remove or load discs while playing the
other deck. Press OPEN/CLOSE (or A) of the deck
that is not currently playing to open that tray, and
remove or load a disc.
that is not currently playing to open that tray, and
remove or load a disc.
• The DISC 1-5 button indicator lights orange when
the disc is in the tray. The indicator lights to green
when the disc is selected (RCD-W500C only).
when the disc is selected (RCD-W500C only).
• You can connect headphones to the PHONES jack
on the front panel. Turn the PHONE LEVEL
control to adjust the volume.
control to adjust the volume.
• You can replace any discs in the other disc trays
while playing a disc in DECK A of RCD-W500C.
Press A of the deck that is not currently playing to
open that tray, and remove or load a disc (Ex-
Change function).
Press A of the deck that is not currently playing to
open that tray, and remove or load a disc (Ex-
Change function).
Do the following:
Press x.
Press X. Press the button again or
press H to resume playing.
press H to resume playing.
Press one of the DISC 1-5 buttons.
Press DISC SKIP on the remote.
Turn AMS* clockwise
while the
ALBUM SELECT indicator in
the display is turned off
the display is turned off
(or press
> on the remote ).
Turn AMS counterclockwise
while
the ALBUM SELECT indicator
in the display is turned off
in the display is turned off
(or
press . on the remote).
Press
OPEN/CLOSE (or A)
,
whichever contains the disc you
want to remove after stopping
play.
want to remove after stopping
play.
POWER
AMS
AMS
H
X
x
PLAY MODE
PLAY MODE
DISC 1-5
A
OPEN/CLOSE
H
x X
(OPEN/CLOSE for RCD-W100)
With the label side up