Sony RDR-GX7 User Manual

Page of 96
45
TV Virtual Surround Settings (TVS)
P
laybac
k
When playing a CD
The default setting is underlined.
• Stereo: The standard stereo sound
• 1/L: The sound of the left channel (monaural)
• 2/R: The sound of the right channel (monaural)
Notes
• Depending on the disc, you may not be able to change the audio format.
• When playing a DVD-RW in VR mode: If you connected to an AV 
amplifier (receiver) using the DIGITAL OUT (COAXIAL or 
OPTICAL) jack and want to switch between the sound tracks, set 
“Dolby Digital” in Audio Setup to “D-PCM.”
Checking the audio signal format
When playing a DVD, you can check the format of the current 
audio signal (Dolby Digital, MPEG audio, DTS, PCM, etc.).
Press DISPLAY.
The following display appears.
Example: Dolby Digital 5.1 ch
About audio signals
Audio signals recorded in a disc contain the sound elements 
(channels) shown below. Each channel is output from a separate 
speaker.
• Front (L)
• Front (R)
• Centre
• Rear (L)
• Rear (R)
• Rear (Monaural): This signal can be either Dolby Surround 
Sound processed signals or Dolby Digital sound’s monaural 
rear audio signals.
• LFE (Low Frequency Effect) signal
Note
If “DTS” is set to “Off” in Audio Setup, the DTS track selection option 
will not appear on the screen even if the disc contains DTS tracks 
(page 79).
TV Virtual Surround 
Settings (TVS)
When you connect a stereo TV or two front speakers, TVS (TV 
Virtual Surround) lets you enjoy surround sound effects by using 
sound imaging to create virtual rear speakers from the sound of 
the front speakers (L: left, R: right) without using actual rear 
speakers.
TVS was developed by Sony to produce surround sound for 
home use using just a stereo TV.
Press SUR repeatedly during playback to select 
one of the TVS sounds.
Refer to the following explanations given for each item.
• Off
• Dynamic
• Wide
• Night
• Standard
TV Virtual Surround modes
Dynamic
Creates one set of virtual rear speakers from the sound of the 
actual front speakers (L, R) as shown below.
This mode is effective when the distance between the front L and 
R speakers is short, such as with built-in speakers on a stereo TV.
Wide
Creates five sets of virtual rear speakers from the sound of the 
actual front speakers (L, R) as shown below.
This mode is effective when the distance between the front L and 
R speakers is short, such as with built-in speakers on a stereo TV.
1 : English  DolbyDigital  3/2.1
Rear (L/R)
Front (L/R) 
+ Centre
LFE (Low Frequency 
Effect)
SUR
TV
TV
,
continued