Sony rdr-hx910 User Manual

Page of 116
2
WARNING
To prevent fire or shock hazard, do not 
expose the unit to rain or moisture.
To avoid electrical shock, do not open 
the cabinet. Refer servicing to qualified 
personnel only.
The mains lead must only be changed 
at a qualified service shop.
This appliance is classified as a 
CLASS 1 LASER product. The 
CLASS 1 LASER PRODUCT 
MARKING is located on the laser 
protective housing inside the 
enclosure.
CAUTION
The use of optical instruments with this 
product will increase eye hazard. As 
the laser beam used in this DVD 
recorder is harmful to eyes, do not 
attempt to disassemble the cabinet.
Refer servicing to qualified personnel 
only.
This label is located on the laser 
protective housing inside the 
enclosure.
Notice for customers in the 
United Kingdom and Republic of 
Ireland
A moulded plug complying with 
BS1363 is fitted to this equipment for 
your safety and convenience.
Should the fuse in the plug supplied 
need to be replaced, a 5 AMP fuse 
approved by ASTA or BSI to BS1362, 
(i.e., marked with 
 or 
 mark) 
must be used.
If the plug supplied with this 
equipment has a detachable fuse cover, 
be sure to attach the fuse cover after 
you change the fuse. Never use the 
plug without the fuse cover. If you 
should lose the fuse cover, please 
contact your nearest Sony service 
station.
Precautions
• This unit operates on 220 – 240 V 
AC, 50/60 Hz. Check that the unit’s 
operating voltage is identical with 
your local power supply.
• To prevent fire or shock hazard, do 
not place objects filled with liquids, 
such as vases, on the apparatus.
VIDEO Plus+ and PlusCode are 
registered trademarks of Gemstar 
Development Corporation. The 
VIDEO Plus+ system is manufactured 
under license from Gemstar 
Development Corporation.
Disposal of Old Electrical & 
Electronic Equipment 
(Applicable in the European 
Union and other European 
countries with separate 
collection systems)
This symbol on the product or on its 
packaging indicates that this product 
shall not be treated as household waste. 
Instead it shall be handed over to the 
applicable collection point for the 
recycling of electrical and electronic 
equipment. By ensuring this product is 
disposed of correctly, you will help 
prevent potential negative 
consequences for the environment and 
human health, which could otherwise 
be caused by inappropriate waste 
handling of this product. The recycling 
of materials will help to conserve 
natural resources. For more detailed 
information about recycling of this 
product, please contact your local city 
office, your household waste disposal 
service or the shop where you 
purchased the product.
Precautions
This equipment has been tested and 
found to comply with the limits set 
out in the EMC Directive using a 
connection cable shorter than 
3 metres.
On safety
Should any solid object or liquid fall 
into the cabinet, unplug the recorder 
and have it checked by qualified 
personnel before operating it any 
further.
About the hard disk drive
The hard disk has a high storage 
density, which enables long 
recording durations and quick 
access to the written data. However, 
it can easily be damaged by shock, 
vibration or dust, and should be kept 
away from magnets. To avoid losing 
important data, observe the 
following precautions.
• Do not apply a strong shock to the 
recorder.
• Do not place the recorder in a 
location subject to mechanical 
vibrations or in an unstable 
location.
• Do not place the recorder on top of 
a hot surface, such as a VCR or 
amplifier (receiver).
• Do not use the recorder in a place 
subject to extreme changes in 
temperature (temperature gradient 
less than 10 °C/hour).
• Do not move the recorder with its 
mains lead connected.
• Do not disconnect the mains lead 
while the power is on.
• When disconnecting the mains 
lead, turn off the power and make 
sure that the hard disk drive is not 
operating (the clock is displayed in 
the front panel display and all 
recording or dubbing has stopped).
• Do not move the recorder for one 
minute after you have unplugged 
the mains lead.
• Do not attempt to replace or 
upgrade the hard disk by yourself, 
as this may result in malfunction.
If the hard disk drive should 
malfunction, you cannot recover lost 
data. The hard disk drive is only a 
temporary storage space.