Sony rdr-gx300 User Manual
45
Rec
o
rd
in
g
4
Select one of the options, and press
ENTER.
ENTER.
“Modify”: Changes the timer setting. Select
an item using
an item using
</, and adjust using M/m.
Select “OK” and press ENTER.
“Erase”: Erases the timer setting. Select “OK”
and press ENTER.
and press ENTER.
“Check Overlap”: Checks for overlapped
settings.
The timer setting set most recently is listed at
the top and has priority over the other settings.
You may not be able to record a program of
lower priority.
settings.
The timer setting set most recently is listed at
the top and has priority over the other settings.
You may not be able to record a program of
lower priority.
To change the priority of a program, press
</
, to select “Change.” For details, see
“Changing the priority of overlapped
settings” (page 46).
“Changing the priority of overlapped
settings” (page 46).
Select “Close” to return to the Timer List.
To change or cancel the setting, repeat steps 3
and 4 above.
To change or cancel the setting, repeat steps 3
and 4 above.
To turn off the Timer List
Press O RETURN.
z
Hint
While recording, you cannot modify the timer setting for
the current recording, but you can extend the recording
duration of the recording time (page 41).
the current recording, but you can extend the recording
duration of the recording time (page 41).
Notes
• Even if the timer is set, timer recordings cannot be
made while recording a program that has priority.
• Even if the timer is set for the same daily or weekly
program, the timer recording cannot be made if it
overlaps with a program that has priority. “
overlaps with a program that has priority. “
” will
appear next to the overlapped setting in the Timer List.
Check the priority order of the settings.
Check the priority order of the settings.
Modify
Modify the timer setting.
OK
Cancel
Date
Mon-Sat
PM
PM
Start
CH
Mode
Stop
:
:
10 00
10 15
25
SP
Erase
Are you sure you want to erase this timer setting?
Mon-Sat 10:00AM - 10:30AM 25ch SP
OK
Cancel
Mon-Sat 10:00AM - 10:30AM 25ch SP
Fri 10/29 9:00AM - 10:15AM 3ch SLP
Check Overlap
These timer settings overlap.
Change
Close
,
continued