Sony RDP-X50IP User Manual

RDP-X50iP_4-199-673-32(2)_CEF/CEK/AU6

expose this apparatus to rain or moisture.
To reduce the risk of fire, do not cover the ventilation of 

the apparatus with newspapers, tablecloths, curtains, etc. 

And do not place lighted candles on the apparatus.
To reduce the risk of fire or electric shock, do not expose 

this apparatus to dripping or splashing, and do not place 

objects filled with liquids, such as vases, on the 

apparatus.
Do not install the appliance in a confined space, such as 

a bookcase or built-in cabinet.
Do not expose the batteries (battery pack or batteries 

installed) to excessive heat such as sunshine, fire or the 

like for a long time.
As the main plug is used to disconnect the unit from the 

mains, connect the unit to an easily accessible AC outlet. 

Should you notice an abnormality in the unit, disconnect 

the main plug from the AC outlet immediately.
The unit is not disconnected from the AC power source 

(mains) as long as it is connected to the wall outlet, even 

if the unit itself has been turned off.
The nameplate and important information concerning 

safety are located on the bottom exterior of main unit 

and on the surface of AC power adaptor.

Danger of explosion if battery is incorrectly replaced. 

Replace only with the same type.
Notice for customers: the following information is 

The manufacturer of this product is Sony Corporation, 

1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The 

Authorized Representative for EMC and product safety is 

Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 

Stuttgart, Germany. For any service or guarantee matters 

please refer to the addresses given in separate service or 

guarantee documents.
The validity of the CE marking is restricted to only those 

countries where it is legally enforced, mainly in the 

countries EEA (European Economic Area).

Compatible with iPod and iPhone

MEGA BASS

Audio in function

Wireless remote commander supplied









Operate the unit on the power source specified in 

“Specifications.”

To disconnect the AC power cord (mains lead), pull it 

out by the plug, not the cord.

Since a strong magnet is used for the speaker, keep 

personal credit cards using magnetic coding or spring-

wound watches away from the unit to prevent possible 

damage from the magnet.

Do not leave the unit in a location near a heat source 

such as a radiator or airduct, or in a place subject to 

direct sunlight, excessive dust, mechanical vibration, or 

shock.

Allow adequate air circulation to prevent internal heat 

build-up. Do not place the unit on a surface (a rug, a 

blanket, etc.) or near materials (a curtain) which might 

block the ventilation holes.

Should any solid object or liquid fall into the unit, 

unplug the unit and have it checked by qualified 

personnel before operating it any further.

To clean the casing, use a soft cloth dampened with a 

mild detergent solution.

If the unit is placed near a CRT-based TV or projector, 

ghosting may occur on its screen. In this case, move the 

unit away.

Wipe the battery with a dry cloth to assure a good 

contact.

Be sure to observe the correct polarity when installing 

the battery.

Do not hold the battery with metallic tweezers, 

otherwise a short-circuit may occur.

This symbol on the product or on its packaging indicates 

that this product shall not be treated as household waste. 

Instead it shall be handed over to the applicable 

collection point for the recycling of electrical and 

electronic equipment. By ensuring this product is 

disposed of correctly, you will help prevent potential 

negative consequences for the environment and human 

health, which could otherwise be caused by 

inappropriate waste handling of this product. The 

recycling of materials will help to conserve natural 

resources. For more detailed information about recycling 

of this product, please contact your local Civic Office, 

your household waste disposal service or the shop where 

you purchased the product.

Applicable accessory: Remote Commander.

This symbol on the battery or on the packaging indicates 

that the battery provided with this product shall not be 

treated as household waste.

On certain batteries this symbol might be used in 

combination with a chemical symbol. The chemical 

symbols for mercury (Hg) or lead (Pb) are added if the 

battery contains more than 0.0005% mercury or 0.004% 

lead.

By ensuring these batteries are disposed of correctly, you 

will help prevent potentially negative consequences for 

the environment and human health which could 

otherwise be caused by inappropriate waste handling of 

the battery. The recycling of the materials will help to 

conserve natural resources.
In case of products that for safety, performance or data 

integrity reasons require a permanent connection with 

an incorporated battery, this battery should be replaced 

by qualified service staff only.

To ensure that the battery will be treated properly, hand 

over the product at end-of-life to the applicable 

collection point for the recycling of electrical and 

electronic equipment.
For all other batteries, please view the section on how to 

remove the battery from the product safely. Hand the 

battery over to the applicable collection point for the 

recycling of waste batteries.
For more detailed information about recycling of this 

product or battery, please contact your local Civic Office, 

your household waste disposal service or the shop where 

you purchased the product.
If you have any questions or problems concerning your 

unit, please consult your nearest Sony dealer.























Connect the AC power cord (supplied) to the AC 

power adaptor (supplied).

Connect the AC power adaptor to the 

 

jack on the back of this unit firmly and plug it into a 

wall outlet.

Use the Sony supplied AC power adaptor only. The polarity of the 

plugs of other manufactures may be different. Failure to use the 

supplied AC power adaptor may cause the unit to malfunction.

Before using the remote commander for the first time, 

remove the insulation film.

With normal use, the battery (CR2025) should last for 

about 6 months. When the remote commander no longer 

operates the unit, replace the battery with a new one.



Do not attempt to charge the battery.

If you are not going to use the remote commander for a long time, 

remove the battery to avoid any damage that may be caused by 

leakage and corrosion.






4-199-673-32(2)

Personal Audio  

Docking System

©2010 Sony Corporation          

Printed in China

RDP-X50iP

Operating Instructions