Sony rdr-gx380 User Manual
20
You can change programme positions of the
recorder using the number buttons.
recorder using the number buttons.
Example: for channel 50
Press “5,” “0,” then press ENTER.
Press “5,” “0,” then press ENTER.
Step 6: Initial Setup
Make the basic adjustments by following the on-
screen instructions in “Initial Setup.”
Be careful not to disconnect the cables or exit the
“Initial Setup” function during this procedure.
screen instructions in “Initial Setup.”
Be careful not to disconnect the cables or exit the
“Initial Setup” function during this procedure.
1
Turn on the recorder and your TV. Then
switch the input selector on your TV so that
the signal from the recorder appears on
your TV screen.
switch the input selector on your TV so that
the signal from the recorder appears on
your TV screen.
The [LANGUAGE] display appears.
2
Select a language for the on-screen
displays using M/m, and press ENTER.
displays using M/m, and press ENTER.
3
Check the antenna connection according to
the display, and press ENTER.
the display, and press ENTER.
4
While [Start] is selected, press ENTER.
The Auto Channel Setting starts.
To cancel the Auto Channel Setting, select
[Cancel] and press ENTER.
To set the programme positions manually, see
page 67.
When the Auto Channel Setting finishes, the
[Clock Setting] display appears.
To cancel the Auto Channel Setting, select
[Cancel] and press ENTER.
To set the programme positions manually, see
page 67.
When the Auto Channel Setting finishes, the
[Clock Setting] display appears.
Changing programme positions of
the recorder using the remote
the recorder using the remote
1
2
3
4
5
6
7
8
9
0
[/1
</M/m/,,
ENTER
ENTER
O RETURN
TV [/1