Sony rdr-gx380 User Manual
43
Rec
o
rd
in
g
The recorder automatically divides a recording (a
title) into chapters by inserting chapter marks at 5
or 10-minute intervals during recording. Select the
interval, [5 minutes] or [10 minutes] for [Auto
Chapter] in the [Video] setup (page 72).
title) into chapters by inserting chapter marks at 5
or 10-minute intervals during recording. Select the
interval, [5 minutes] or [10 minutes] for [Auto
Chapter] in the [Video] setup (page 72).
z
Hints
• You can create chapters manually when playing a
DVD+RW, DVD-RW (VR mode), or DVD+R
(page 59).
(page 59).
• When recording in ULP mode, chapter marks are
inserted at 10-minute intervals.
You can use the Title List to make a new recording
over a title previously recorded on the disc. For
details about the Title List, see page 30.
over a title previously recorded on the disc. For
details about the Title List, see page 30.
1
Insert a DVD+RW.
2
Press PROG +/– or INPUT to select a
programme position or input source.
programme position or input source.
3
Press TITLE LIST to turn on the Title List.
4
Press </M/m/, to select the title you
want to overwrite.
want to overwrite.
5
Press z REC.
Recording starts.
To stop recording
Press x REC STOP. Note that it may take a few
seconds for recording to stop.
seconds for recording to stop.
z
Hint
If you erase a title from a DVD+RW, it appears as [Erase]
in the Title List. This will not increase the remaining time
on the disc. However, the remaining time will be
increased when erasing the last title. You can select
[Erase] from the Title List and make a new recording on
top of it (page 56).
in the Title List. This will not increase the remaining time
on the disc. However, the remaining time will be
increased when erasing the last title. You can select
[Erase] from the Title List and make a new recording on
top of it (page 56).
b
Notes
• A protected title cannot be overwritten (page 57).
• If the selected title is shorter than the new recording, or
• If the selected title is shorter than the new recording, or
less than ten seconds, the recorder automatically
overwrites the next title in the Title List. If you do not
want a title to be overwritten, protect the title (page 57).
overwrites the next title in the Title List. If you do not
want a title to be overwritten, protect the title (page 57).
Recording From Connected
Equipment
Equipment
You can record from a connected VCR or similar
device. To connect a VCR or similar device, see
“Connecting a VCR or Similar Device” (page 22).
Use the DV IN jack on the front panel if the
equipment has a DV output jack (i.LINK jack).
device. To connect a VCR or similar device, see
“Connecting a VCR or Similar Device” (page 22).
Use the DV IN jack on the front panel if the
equipment has a DV output jack (i.LINK jack).
1
Insert a recordable disc.
2
Press INPUT to select an input source
according to the connection you made.
according to the connection you made.
The front panel display changes as follows:
3
Press REC MODE repeatedly to select the
recording mode.
recording mode.
The recording mode changes as follows:
4
Insert the source tape into the connected
equipment and set to playback pause.
equipment and set to playback pause.
Creating chapters in a title
Overwriting a recorded title
+
RW
-RW
VR
-RW
Video
+
RW
-
R
+
R
1
2
3
4
5
6
7
8
9
0
x REC STOP
REC MODE
INPUT
z REC
Programme
position
position
L1
L2
L3
dV
HQ
SP
LP
EP
ULP
,continued