Sony rdr-gx380 User Manual
86
The
DV IN
jack on this recorder is i.LINK-
compliant for digital video cameras.
i.LINK is a more familiar term for IEEE 1394 data
transport bus proposed by SONY, and is a
trademark approved by many corporations.
IEEE 1394 is an international standard
standardized by the Institute of Electrical and
Electronics Engineers.
For details on how to dub when this recorder is
connected to other video equipment having DV
jacks, see page 62.
The DV IN jack on this recorder can only input
DVC-SD signals. It cannot output signals. The DV
IN jack will not accept MICRO MV signals from
equipment such as a MICRO MV digital video
camera with an i.LINK jack.
For further precautions, see the notes on page 62.
For details on precautions when connecting this
recorder, also refer to the instruction manuals for
the equipment to be connected.
i.LINK is a more familiar term for IEEE 1394 data
transport bus proposed by SONY, and is a
trademark approved by many corporations.
IEEE 1394 is an international standard
standardized by the Institute of Electrical and
Electronics Engineers.
For details on how to dub when this recorder is
connected to other video equipment having DV
jacks, see page 62.
The DV IN jack on this recorder can only input
DVC-SD signals. It cannot output signals. The DV
IN jack will not accept MICRO MV signals from
equipment such as a MICRO MV digital video
camera with an i.LINK jack.
For further precautions, see the notes on page 62.
For details on precautions when connecting this
recorder, also refer to the instruction manuals for
the equipment to be connected.
b
Note
Normally, only one piece of equipment can be connected
to this recorder by the i.LINK cable (DV connecting
cable). When connecting this recorder to i.LINK-
compatible equipment having two or more i.LINK jacks
(DV jacks), refer to the instruction manual of the
equipment to be connected.
to this recorder by the i.LINK cable (DV connecting
cable). When connecting this recorder to i.LINK-
compatible equipment having two or more i.LINK jacks
(DV jacks), refer to the instruction manual of the
equipment to be connected.
i.LINK and are trademarks.
Specifications
System
Laser: Semiconductor laser
Channel coverage:
Laser: Semiconductor laser
Channel coverage:
PAL (B/G, D/K, I)/SECAM (L)
VHF: E2 to E12, R1 to R12, F2 to F10,
Italian A to H, Ireland A to J, South Africa
4 to 11, 13
UHF: E21 to E69, R21 to R69, B21 to B69,
F21 to F69
CATV: S01 to S05, S1 to S20, France B to
Q
VHF: E2 to E12, R1 to R12, F2 to F10,
Italian A to H, Ireland A to J, South Africa
4 to 11, 13
UHF: E21 to E69, R21 to R69, B21 to B69,
F21 to F69
CATV: S01 to S05, S1 to S20, France B to
Q
HYPER: S21 to S41
The above channel coverage merely ensures the
channel reception within these ranges. It does not
guarantee the ability to receive signals in all
circumstances. The channels that can be received
differ depending on the country/region.
channel reception within these ranges. It does not
guarantee the ability to receive signals in all
circumstances. The channels that can be received
differ depending on the country/region.
Video reception: Frequency synthesizer
system
Audio reception: Split carrier system
Aerial out: 75-ohm asymmetrical aerial
Aerial out: 75-ohm asymmetrical aerial
socket
Timer: Clock: Quartz locked/Timer
indication: 24-hour cycle (digital)
Video recording format: MPEG-2
Audio recording format/applicable bit
Audio recording format/applicable bit
rate: Dolby Digital 2 ch
256 kbps (in HQ and SP mode), 192 kbps
(in LP and EP mode), 96 kbps (in ULP
mode)
256 kbps (in HQ and SP mode), 192 kbps
(in LP and EP mode), 96 kbps (in ULP
mode)
Inputs and outputs
AUDIO OUT: Phono jack/2 Vrms/600 ohms
LINE 2 IN
(AUDIO): Phono jack/2 Vrms/more than
AUDIO OUT: Phono jack/2 Vrms/600 ohms
LINE 2 IN
(AUDIO): Phono jack/2 Vrms/more than
47 kilohms
(VIDEO): Phono jack/1.0 Vp-p
LINE 1-TV: 21-pin
LINE 1-TV: 21-pin
CVBS IN/OUT
RGB OUT (upstream)
RGB OUT (upstream)
LINE 3/DECODER: 21-pin
CVBS IN/OUT
S-Video/RGB IN
Decoder
S-Video/RGB IN
Decoder
About i.LINK