Sony rdr-vx420 User Manual
105
Set
tin
tin
g
s and
Ad
ju
ju
st
m
ent
s
s
Audio Settings (Audio)
The “Audio” setup allows you to adjust the sound
according to the playback and connection
conditions.
according to the playback and connection
conditions.
Select “Audio” in the “Setup” display.
The default settings are underlined.
The default settings are underlined.
Digital Out
Selects if audio signals are output from the
DIGITAL AUDIO OUT (OPTICAL or
COAXIAL) jack.
DIGITAL AUDIO OUT (OPTICAL or
COAXIAL) jack.
The following setup items switches the method of
outputting audio signals when you connect a
component such as an amplifier (receiver) with a
digital input jack.
For connection details, see “Step 4: Connecting to
Your AV Amplifier (Receiver)” on page 17.
outputting audio signals when you connect a
component such as an amplifier (receiver) with a
digital input jack.
For connection details, see “Step 4: Connecting to
Your AV Amplifier (Receiver)” on page 17.
Note
If you connect a component that does not accept the
selected audio signal, a loud noise (or no sound) will
come out from the speakers, and may affect your ears or
cause speaker damage.
selected audio signal, a loud noise (or no sound) will
come out from the speakers, and may affect your ears or
cause speaker damage.
◆Dolby Digital (DVDs only)
Selects the type of Dolby Digital signal.
Selects the type of Dolby Digital signal.
◆DTS (DVD VIDEOs only)
Selects whether or not to output DTS signals.
Selects whether or not to output DTS signals.
◆MPEG (DVD VIDEOs only)
Selects the type of MPEG audio signal.
Selects the type of MPEG audio signal.
On
Normally select this. Press
ENTER, and select “Dolby
Digital,” “DTS,” or
“MPEG” for further settings
(see below).
ENTER, and select “Dolby
Digital,” “DTS,” or
“MPEG” for further settings
(see below).
Off
The influence of the digital
circuit upon the analogue
circuit is minimum.
circuit upon the analogue
circuit is minimum.
Digital Out
Downmix
Audio DRC
Scan Audio
DV Audio Input
Line Audio Inout
: On
: Dolby Surround
: Standard
: On
: Stereo 1
: Stereo
Audio
Setup
Disc Setting
Edit
Title List
Timer
Dubbing
10:10
Dolby Digital
DTS
MPEG
Digital Out
: D-PCM
: Off
: PCM
Setup
Disc Setting
Edit
Title List
Timer
Dubbing
10:10
D-PCM
Select this when the recorder
is connected to an audio
component lacking a built-in
Dolby Digital decoder. You
can select whether the
signals conform to Dolby
Surround or not by making
adjustments to the
“Downmix” item in “Audio”
setup (page 106).
is connected to an audio
component lacking a built-in
Dolby Digital decoder. You
can select whether the
signals conform to Dolby
Surround or not by making
adjustments to the
“Downmix” item in “Audio”
setup (page 106).
Dolby
Digital
Digital
Select this when the recorder
is connected to an audio
component with a built-in
Dolby Digital decoder.
is connected to an audio
component with a built-in
Dolby Digital decoder.
On
Select this when the recorder
is connected to an audio
component with a built-in
DTS decoder.
is connected to an audio
component with a built-in
DTS decoder.
Off
Select this when the recorder
is connected to an audio
component without a built-in
DTS decoder.
is connected to an audio
component without a built-in
DTS decoder.
PCM
Select this when the recorder
is connected to an audio
component without a built-in
MPEG decoder. If you play
MPEG audio sound tracks,
the recorder outputs stereo
signals via the DIGITAL
AUDIO OUT (OPTICAL or
COAXIAL) jack.
is connected to an audio
component without a built-in
MPEG decoder. If you play
MPEG audio sound tracks,
the recorder outputs stereo
signals via the DIGITAL
AUDIO OUT (OPTICAL or
COAXIAL) jack.
MPEG
Select this when the recorder
is connected to an audio
component with a built-in
MPEG decoder.
is connected to an audio
component with a built-in
MPEG decoder.
,continued