Sony rht-g800 User Manual
26
GB
• The two digits entered last are valid.
To cancel programming
Press the input button (TV, DVD/BD, SAT,
AUDIO) you pressed in step 1.
AUDIO) you pressed in step 1.
If programming is unsuccessful,
check the following:
check the following:
• If the input button you pressed in step 1 does
not light up, the batteries are weak. Replace
both batteries.
both batteries.
• If you do not press the following button within
60 seconds during registration, the operation
will become invalid. Perform the process from
step1 again.
will become invalid. Perform the process from
step1 again.
• An error has occurred when the input button
you pressed in step 1 flashes five times after
ENTER has been pressed in step 3. Perform
the process from step 1 again.
ENTER has been pressed in step 3. Perform
the process from step 1 again.
You can program the remote to control non-Sony
components by changing the code. Once the
control signals have been memorized, you can
use those components as part of your stand.
Furthermore, you can also program the remote
for Sony components that the remote is unable to
control. Note that the remote can only control
components that accept infrared wireless control
signals.
You cannot register any component other than a
TV into the TV button of the remote.
components by changing the code. Once the
control signals have been memorized, you can
use those components as part of your stand.
Furthermore, you can also program the remote
for Sony components that the remote is unable to
control. Note that the remote can only control
components that accept infrared wireless control
signals.
You cannot register any component other than a
TV into the TV button of the remote.
1
Press AV ?/1 while holding down the
input button (TV, DVD/BD, SAT, AUDIO)
for the component you want to operate.
input button (TV, DVD/BD, SAT, AUDIO)
for the component you want to operate.
For example, if you are going to operate a
DVD player, press DVD/BD.
The input button you pressed flashes.
DVD player, press DVD/BD.
The input button you pressed flashes.
2
Check the manufacture code of the
component you want to operate and
press the number button.
component you want to operate and
press the number button.
Programming the remote
for other component
for other component
AV ?/1
Input buttons
(TV, DVD/BD,
SAT, AUDIO)
(TV, DVD/BD,
SAT, AUDIO)
Number buttons
ENTER