Sony rdr-dc205 User Manual

Page of 120
87
Set
tings
 a
nd 
Adj
u
st
m
e
nt
s
Allows you to select whether or not to 
update the channel list automatically to the 
latest.
Recorder Settings 
(System 1)
The recorder can automatically divide a 
recording (title) into chapters by inserting 
chapter marks. You can select chapter mark 
intervals or disable this function.
b
• The actual chapter mark interval may vary 
depending on the amount of information 
contained in the video to be recorded.
• The “Auto Chapter” function is not available 
during dubbing.
Sets the maximum continuous recording 
time for recording in EP mode (only for 
analogue broadcasts or an external input).
Auto Service Update
On
Updates the channel list 
automatically.
Off
Does not update the channel 
list automatically.
Standby Mode
Mode 1
When the recorder is turned 
off,
– Input signals from the LINE 
1/DECODER jack are not 
output from the LINE 3 – 
TV jack (page 25) and the 
connected external decoder 
cannot be used (page 27).
– Aerial input signals are not 
output to the connected TV.
To watch TV, use a splitter to 
divide aerial input signals 
between the TV and the 
recorder (page 16).
Mode 2
When the recorder is turned 
off, input signals from the 
LINE 1/DECODER jack are 
output from the LINE 3 – TV 
jack and aerial input signals 
are output to the connected 
TV. The standby power 
consumption is higher than 
that of “Mode 1.”
Auto Power off
On
The recorder automatically 
turns off when you do not 
press any buttons for 6 hours 
in stop mode. The display asks 
for confirmation about one 
minute before the recorder 
turns off. If you want to keep 
the recorder on, select 
“Cancel,” and press 
.
Off
Turns off the function.
Auto Chapter
Off
No chapter mark is inserted.
10 minutes
Inserts chapter marks at 
approximately 10-minute 
intervals.
15 minutes
Inserts chapter marks at 
approximately 15-minute 
intervals.
EP Mode Time
6 hours
Allows you to record 
continuously for 6 hours.
8 hours
Allows you to record 
continuously for 8 hours with 
lower picture quality.
Control for HDMI
On
Allows you to use the 
“Control for HDMI” function 
(page 20).
Off
Turns off the function.
,continued