Sony RM-AX4000A User Manual

• If the remote control detectors of the

components are too far apart, or if something
is blocking them, some of the components
may not operate in the ordered sequence
when you press a SYSTEM CONTROL
button or System Control key.

• If some of the components did not operate

correctly because of the above or for any
other reason, always set all the components
back to the states they were in before you
pressed the SYSTEM CONTROL button or
the System Control key. Failure to do this can
result in incorrect operation when you press
the SYSTEM CONTROL buttons or the
System Control keys again.

• Some components may not always be

powered-on by the System Control function.
This is because the power of the component
goes on and off alternately when receiving
the power on/off signal. In this case, check
the operating component’s power on/off
state before using the System Control
function.

EPG

MENU

SYSTEM CONTROL

OK

1

MORE

4

3

COMPONENT

VOLUME

BACK

X

PRESS

2

RECALL

LIGHT

TIMER

MUTING

SYNC-UP

CHANNEL

EXIT

TOOLS

ALL OFF

OFF

COMMANDER

The Remote Commander has a backlight
on the LCD display. Pressing any button
or key also activates this by default. If no
button or key is pushed within a set time,
the backlight automatically turns off.

Off-time setting

10 seconds

Brightness

Level 15 (Max: 15)

Fade effect

On

On-mode setting

All keys and buttons

For On-PC Setup: See the Help menu
provided in “AX Remote Editor.”
Or see “Setting the backlight” on page 34.
For On-Remote Setup: See “Setting the
backlight” on page 34.

LIGHT button