Sony RM-TP1 User Manual
20
GB
Operating the amplifier/
receiver
receiver
You can operate a Sony 2 way amplifier/
receiver. You can also download the names of
components (functions). Before operating,
register the Sony amplifier/receiver using the
IR SETUP function (page 10).
receiver. You can also download the names of
components (functions). Before operating,
register the Sony amplifier/receiver using the
IR SETUP function (page 10).
When performing the following procedure,
be sure to turn on the amplifier/receiver
and point the commander towards the IR
receptor on the amplifier/receiver.
be sure to turn on the amplifier/receiver
and point the commander towards the IR
receptor on the amplifier/receiver.
To register a 2 way amplifier/
receiver
receiver
Use the RM SETUP screen.
Note
You cannot register the amplifier/receiver if it is not
set to use the 2 way remote system. Refer to “Setting
up the 2 way remote” in the operating instructions
supplied with the amplifier/receiver.
set to use the 2 way remote system. Refer to “Setting
up the 2 way remote” in the operating instructions
supplied with the amplifier/receiver.
1
Touch RM SETUP.
2
Touch AMP REGIST.
3
Touch START.
The communication starts and the amplifier/
receiver is registered to the commander.
The registered amplifier/receiver name
appears in the screen. The amplifier/receiver
name also appears in the RM SETUP screen
as the current setting.
receiver is registered to the commander.
The registered amplifier/receiver name
appears in the screen. The amplifier/receiver
name also appears in the RM SETUP screen
as the current setting.
Note
If the amplifier/receiver name appears as “model
others”, the amplifier/receiver is not registered
correctly. In this case, some 2 way operations may
not be possible.
others”, the amplifier/receiver is not registered
correctly. In this case, some 2 way operations may
not be possible.
To operate the amplifier/
receiver
receiver
1
Select the Sony amplifier/receiver in the
RM SELECT screen.
RM SELECT screen.
“1WAY 2WAY” appears.
Tip
When you can select several Sony amplifiers/
receivers in the RM SELECT screen, touch the
AMP icon that appears first.
receivers in the RM SELECT screen, touch the
AMP icon that appears first.
2
Touch 2WAY.
The screen for the 2 way operation appears
and you can operate the amplifier/receiver
registered in the RM SETUP screen.
and you can operate the amplifier/receiver
registered in the RM SETUP screen.
To download the names of components
(functions), touch INPUT SELECT, then
touch INPUT NAME DOWNLOAD.
(functions), touch INPUT SELECT, then
touch INPUT NAME DOWNLOAD.
To download the names of sound fields,
touch SOUND FIELD, then touch S.F.
NAME DOWNLOAD.
touch SOUND FIELD, then touch S.F.
NAME DOWNLOAD.
Notes
• 2 way operations may not be possible immediately
after turning on the amplifier/receiver.
• You cannot use the jog dial when using the 2WAY
screen.
• You cannot use the Learning function for the keys
in the 2WAY screen.