Sony RM-AV2000 User Manual
26
Turning Off the Power
of All Components by a
Single Button
Operation
of All Components by a
Single Button
Operation
— System Power-Off Function (for
Sony Components only)
Sony Components only)
When the System Power-Off function is
active, you can turn off all Sony
components just by pressing the
COMMANDER OFF button for three
seconds.
active, you can turn off all Sony
components just by pressing the
COMMANDER OFF button for three
seconds.
To set the System Power-Off
function
function
1
While pressing COMMANDER
OFF, press CHANNEL - and
VOLUME +.
OFF, press CHANNEL - and
VOLUME +.
When the System Power-Off function
is set, “POWER OFF” appears on the
display. (The display goes off when
you release the buttons.)
is set, “POWER OFF” appears on the
display. (The display goes off when
you release the buttons.)
To cancel the System Power-Off
function
function
Repeat the procedure above. The
following display appears when the
System Power-Off function is disabled.
following display appears when the
System Power-Off function is disabled.
POWER
OFF
POWER
4
Press and hold down the button
on the component’s remote
control (amplifier in this example)
until you hear a beep.
on the component’s remote
control (amplifier in this example)
until you hear a beep.
5
Press COMMANDER OFF.
To clear the learned function of
the Component Select button
the Component Select button
1 While pressing COMMANDER OFF,
press VOLUME+ and CHANNEL+.
2 While pressing the RESET key, press
the Component Select button which
you want to clear.
you want to clear.
Note
• Even if that Component Select button has
been programmed with the Power-on
command (page 24), you can program any
signal on it by the procedure above.
However, the new signal overwrites the
Power-on command, and even after you clear
this new signal, the Power-on command will
not resume.
command (page 24), you can program any
signal on it by the procedure above.
However, the new signal overwrites the
Power-on command, and even after you clear
this new signal, the Power-on command will
not resume.
COMMANDER
OFF
Adding an Extra Function to the
Component Select Buttons
(continued)
Component Select Buttons
(continued)
COMMANDER
OFF
+
+
CHANNEL
VOLUME
–
+
INPUT SELECT
CD