Sony RM-VL1400T User Manual
7
GB
Basic Operations
Setting operations of A/V components
—Setting component code
The Remote Commander is preset at the factory to operate Sony brand A/V components.
(Refer to the table below.)
If you are using the Remote Commander with factory-set Sony components, skip the
following procedures.
To use with other brand A/V components, or Sony A/V components which do not
function with the Remote Commander, you need to follow the procedures to set the
component code.
(Refer to the table below.)
If you are using the Remote Commander with factory-set Sony components, skip the
following procedures.
To use with other brand A/V components, or Sony A/V components which do not
function with the Remote Commander, you need to follow the procedures to set the
component code.
Factory preset
1
Refer to the tables in the
supplied “Preset Code List” to
find the four-digit preset code
for the desired A/V
component.
supplied “Preset Code List” to
find the four-digit preset code
for the desired A/V
component.
If more than one code number is
listed, use the number that is listed
first. For example, to set up a
Panasonic TV, you would use the code
number 8095.
listed, use the number that is listed
first. For example, to set up a
Panasonic TV, you would use the code
number 8095.
2
While pressing the
(light)
button, press the OTHER
button.
button.
“SET MODE” appears as the screen
title.
title.
3
Press the
V/v buttons to
select “1 PRESET”, then press
the OK button or the centre
Label select button.
the OK button or the centre
Label select button.
“PRESET” appears as the screen title.
Tip
If a number is displayed before the menu,
you can select the menu by pressing the
number button.
you can select the menu by pressing the
number button.
4
Press the COMPONENT
select button for the desired
A/V component.
select button for the desired
A/V component.
The selected A/V component’s label
and the preset code currently set
appear on the screen.
and the preset code currently set
appear on the screen.
Tips
• To set A/V components which are not
specified on the COMPONENT select
buttons, press the OTHER button
repeatedly, then press the Label select
button corresponding to the desired A/V
component.
buttons, press the OTHER button
repeatedly, then press the Label select
button corresponding to the desired A/V
component.
• You can set components to the
COMPONENT select buttons or Label
select buttons than those that are
specified on each other button or on the
screen. Note however, that the TV button
can only be set a TV, and the Label select
button (to which an amplifier is set at the
factory preset) can only be set an
amplifier or DVD player home theatre
system.
select buttons than those that are
specified on each other button or on the
screen. Note however, that the TV button
can only be set a TV, and the Label select
button (to which an amplifier is set at the
factory preset) can only be set an
amplifier or DVD player home theatre
system.
COMPONENT select buttons
TV
VCR
SAT
DVD
Label select button-left
Label select button-centre
Label select button-right
Label select button-left
Label select button-centre
Label select button-right
Screen title
Preset A/V components
TV
Sony TV (Analogue)
VCR
Sony VCR (Video Cassette Recorder)
SAT
Sony Analogue Satellite Receiver
DVD
Sony DVD player
CABLE
Analogue Cable box
DVD-R
Sony DVD Recorder
AMP
Sony Receiver/Amplifier
CD
Sony CD player
MD
Sony MD deck
TAPE
Sony Cassette deck
Page 1/2
Page 2/2
OTHER
Continued