Sony BKS-R1601 User Manual

5-40

ROUTING SWITCHER SYSTEM (E)

This menu is used to set the display mode.

The setting contents are as follows.

DISPLAY MODES (BKS-R3216/R3220):
Selects the display type. (when J : NAME STYLE

(DESCRIP.NAME) is selected in the primary station
menu.)

NORMAL = Normal display
2 

+ 2CHAR = Displays two letters before and after the

name.

4CHAR =

Displays four letters from the beginning

of the name.

n
If 2 : 2 

+ 2CHAR or 3 : 4CHAR is selected when J :

NAME STYLE (Type 

+ Num) is selected in the primary

station menu, the two letters and two numbers of the type

name are displayed.

PANEL FUNCTION (BKS-R1617/R1618/R3219/R1621):
Sets the operation mode of the panel.

NORMAL =

Normal selection mode

4 DESTINATION = Destinations can be set for each

block of the source button that
consists of four blocks.

Set each source button and also set
the destination of each block using

the menu item [N : SET PANEL
TABLE].

TALLY GROUP

Selects the tally group.

1.

Select the menu item [Y].

2.

The cursor appears in “DISPLAY MODES = 1”.
Move the cursor to an arbitrary mode and press
[Enter] establishes the input mode.

3.

Enter the desired number with the numeric keys.

Press [Enter] to set the number ; the cursor moves to
the next setting item.

If you do not want to change the default value, press
[Enter] without entering any number.

4.

To set “TALLY GROUP”, move the cursor to the
position of the desired tally (in the case of tally 2,

second “

_” from the left) and press [Enter]. The item

is toggled on and off every time [Enter] is pressed.

(When the number is displayed, the item is ON. When
“

_” is displayed, the item is OFF.)

SONY ROUTING SYSTEM SETUP MENU         BKS-R3220 V1.03Å

   STATION NUMBER 2

 SET DISPLAY MODES

  DISPLAY MODES       = 1    1:NORMAL  2:2+2CHAR   3:4CHAR  *:UNRELATED

  PANEL FUNCTION      = *    1:NORMAL  2:4 DESTINATION      *:UNRELATED

  TALLY GROUP         = 1---

 

  Ctrl-E:MENU  Ctrl-D:RETURN

5-2. Setting Items of the Secondary Station