Sony BKS-R1601 User Manual

Page of 158
7-2
ROUTING SWITCHER SYSTEM (E)
7-2. Changed Menu (Primary Station Setting Items)
7-2. Changed Menu (Primary Station Setting Items)
n
The menu screen shown below is based on the DVS-128.
Initial screen (DVS-128/HDS-X3000 Series)
When the [Ctrl] 
_ [X] key is pressed after the main power is turned on, the following display appears.
Example of Initial Screen
Changed item
. [K: RESET TO DEFAULT TABLE] is deleted from the primary station screen and is moved to the
secondary station screen.
When [K: RESET TO DEFAULT TABLE] is executed on the secondary station screen, the partial
initialization is executed in the S-P1, but is changed so that all data including the works is reset to the
default data when shipped from the factory.
. [S: SET SOURCE ASSIGNMENT] is newly added.
.  The [Ctrl] _ [B] key is added as the key input to return to the initial menu (the screen when the main
power is turned on.)  The [Ctrl] 
_ [B] key has the same function as the [Ctrl] _ [X].
SONY ROUTING SYSTEM SETUP MENU     DVS-128  V1.00  STATION NUMBER 1
                     MODIFICATION COMMAND
 A: DISPLAY CONTROL AREA           B: SET SOURCE/DEST TYPE
 C: SET DESTINATION NAME           D: SET SOURCE NAME
 E: SET LEVEL TABLE                F: SET ACTIVE UNIT NUMBER
 G: UPDATE BACKUP CONTROLLER       H: SET GLOBAL PHANTOM
 J: NAME STYLE(Type + Num)         L: SET PHYSICAL ASSIGNMENT        
 M: SET INHIBIT TABLE              N: SET DESCRIPTION NAME GROUP     
 O: SET TIE LINES                  Q: CHANGE CROSSPOINT
 R: CALL SECONDARY STATION         S: SET SOURCE ASSIGNMENT
                     MAINTENANCE COMMAND
   
 P: CHANGE PASSWORD                T: SET CLOCK
 U: SELECT CONTROL MODE            W: SYSTEM STATUS LOG              
 X: DISPLAY S-BUS COMMUNICATION    Z: SET UNIT DETECTABLE
   Ctrl-X/B:QUIT SETUP MENU