Sony SA-VE335 User Manual

Page of 2
 
2002 Sony Corporation
Printed in Japan
 English
 Français
Hooking up the system
Connect the speaker system to the speaker output
terminals of an amplifier (A).
Make sure power to all components (included the
subwoofer) is turned off before starting the hook-up.
Notes (B)
• Make sure the plus (+) and the minus (–) terminals on
the speakers are matched to the corresponding plus (+)
and minus (–) terminals on the amplifier.
• Be sure to tighten the screws of the speaker terminals
securely as loose screws may become a source of noise.
• Make sure all connections are firm.  Contact between
bare speaker wires at the speaker terminals may cause
a short-circuit.
• For details regarding the connections on the amplifier
side, refer to the manual that was provided with your
amplifier.
Tip
Black or black striped wires are minus (–) in polarity, and
should be connected to the minus (–) speaker terminals.
 AVERTISSEMENT
Pour éviter tout risque d’incendie ou d’électrocution,
ne pas exposer cet appareil à la pluie ou à l’humidité.
Pour prévenir tout risque d’incendie, ne couvrez pas les
orifices d’aération de l’appareil avec des journaux, nappes,
rideaux, etc. Et ne placez pas de bougies allumées sur
l’appareil.
Pour prévenir tout risque d’incendie ou d’électrocution,
ne posez aucun objet rempli de liquide, comme un vase,
sur l’appareil.
Pour prévenir tout risque d’électrocution, n’ouvrez jamais
le coffret. Adressez-vous à un personnel qualifié
uniquement pour toute intervention sur l’appareil.
N’installez pas l’appareil dans un espace confiné
comme dans une bibliothèque ou un meuble
encastré.
NOTICE POUR LES CLIENTS AU CANADA
ATTENTION
POUR PREVENIR LES CHOCS ELECTRIQUES, NE PAS
UTILISER CETTE FICHE POLARISEE AVEC UN
PROLONGATEUR, UNE PRISE DE COURANT OU
UNE AUTRE SORTIE DE COURANT, SAUF SI LES
LAMES PEUVENT ETRE INSEREES A FOND SANS EN
LAISSER AUCUNE PARTIE A DECOUVERT.
Modèles autres que pour I’Europe
Raccordement du système
acoustique
Raccordez le système acoustique aux bornes d’enceintes
de l’amplificateur (A).
Avant de raccorder les cordons, assurez-vous que tous
les appareils (caisson de grave compris) sont hors
tension.
Remarques (B)
• Assurez-vous que les bornes plus (+) et moins (–) des
enceintes correspondent aux bornes plus (+) et (–) de
l’amplificateur.
• Veillez à bien serrer les vis des bornes d’enceintes, car
des vis desserrées peuvent être une source de parasites.
• Veillez à insérer à fond les fils dans les bornes. Le
contact des fils d’enceinte dénudés au niveau des
bornes de l’enceinte peut provoquer un court-circuit.
• Pour les connexions côté amplificateur, reportez-vous
au manuel fourni avec l’amplificateur.
Conseil
Les fils noirs ou rayés noirs ont une polarité négative (–)
et doivent être reliés aux bornes moins (–) des enceintes.
About this manual
The SA-VE335 is a 5.1 channel speaker system consisting
of two front speakers, two rear speakers, one center
speaker, and one subwoofer. It supports Sony Digital
Cinema Sound, Dolby* Pro Logic, and Dolby Digital etc.,
and is thus geared towards the enjoyment of movies.
* “Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.
Precautions
On safety
• Before operating the system, be sure that the operating
voltage of the system is identical with that of your local
power supply.
• The unit is not disconnected from the AC power source
(mains) as long as it is connected to the wall outlet,
even if the unit itself has been turned off.
• Unplug the system from the wall outlet if it is not to be
used for an extended period of time.  To disconnect the
cord, pull the cord by grasping the plug.  Never pull
the cord itself.
• Should any liquid or solid object fall into the system,
unplug the system’s power cord and have the system
checked by qualified personnel before operating it any
further.
• AC power cord must be changed only at the qualified
service shop.
On operation
• Do not drive the speaker system with a continuous
wattage exceeding the maximum input power of the
system.
• If the polarity of the speaker connections are not
correct, the bass tones will be weak and the position of
the various instruments obscure.
• Contact between bare speaker wires at the speaker
terminals may result in a short-circuit.
• Before connecting, turn off the amplifier to avoid
damaging the speaker system.
• The speaker grille cannot be removed.  Do not attempt
to remove the grille on the speaker system.  If you try
to remove it, you may damage the speaker.
The volume level should not be turned up to
the point of distortion.
If you encounter color irregularity on a
nearby TV screen
This speaker system is magnetically shielded to allow it
to be installed near a TV set.  However, color
irregularities may still be observed on certain types of TV
sets.
If color irregularity is observed...
c Turn off the TV set, then turn it on again after 15 to
30 minutes.
If color irregularity is observed again...
c Place the speakers further away from the TV set.
If howling occurs
Reposition the speakers or turn down the volume on the
amplifier.
On placement
• Do not set the speakers in an inclined position.
• Do not place the speakers in locations that are:
— Extremely hot or cold
— Dusty or dirty
— Very humid
— Subject to vibrations
— Subject to direct sunlight
On cleaning
Clean the speaker cabinets with a soft cloth lightly
moistened with a mild detergent solution or water.  Do
not use any type of abrasive pad, scouring powder or
solvent such as alcohol or benzine.
If you have any questions or problems concerning your
speaker system, please consult your nearest Sony dealer.
Micro Satellite Speaker System
SA-VE335
4-239-776-12(3)
 WARNING
To prevent fire or shock hazard, do not expose the
unit to rain or moisture.
To prevent fire, do not Cover the ventilation of the
apparatus with news papers, table-cloths, curtains, etc. And
don’t place lighted candles on the apparatus.
To prevent fire or shock hazard, do not place objects
filled with liquids, such as vases, on the apparatus.
To avoid electrical shock, do not open the cabinet. Refer
servicing to qualified personnel only.
Do not install the appliance in a confined space, such
as a bookcase or built-in cabinet.
NOTICE FOR THE CUSTOMERS IN THE USA
This symbol is intended to alert the user to
the presence of uninsulated “dangerous
voltage” within the product’s enclosure
that may be of sufficient magnitude to
constitute a risk of electric shock to
persons.
This symbol is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
CAUTION
You are cautioned that any changes or modification not
expressly approved in this manual could void your
authority to operate this equipment.
Note to CATV system installer:
This reminder is provided to call CATV system installer’s
attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular,
specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of
cable entry as practical.
CAUTION
Use of this applicance with some systems may present a
shock or fire hazard. Do not use with any units which
have the following marking located near output.
WARNING: HAZARDOUS ENERGY!
NOTICE FOR THE CUSTOMERS IN CANADA
CAUTION
TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS
POLARIZED AC PLUG WITH AN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET UNLESS THE
BLADES CAN BE FULLY INSERTED TO PREVENT
BLADE EXPOSURE.
Except for European models
A propos de ce manuel
Le SA-VE335 est un ensemble de haut-parleurs 5.1 voies
composé de deux haut-parleurs avant, deux haut-
parleurs arrière, un haut-parleur central et un subwoofer.
Il prend en charge les systèmes Sony Digital Cinema
Sound, Dolby* Pro Logic, et Dolby Digital etc. Il est par
conséquent réservé au visionnage de films.
* “Dolby” et le symbole double D sont des marques de
commerce de Dolby Laboratories.
Précautions
Sécurité
• Avant de mettre le système en service, assurez-vous
que sa tension de fonctionnement est identique à celle
de l’alimentation secteur locale.
• Le système n’est pas isolé de la source d’alimentation
secteur tant qu’il reste branché sur la prise murale,
même s’il a été éteint.
• Débranchez le système s’il ne doit pas être utilisé
pendant longtemps. Pour débrancher le cordon, tirez
sur la fiche. Ne jamais tirer sur le cordon proprement
dit.
• Si un liquide ou un solide pénètre dans le système,
débranchez le cordon d’alimentation du système et
faites vérifier le système par un professionnel avant de
l’utiliser à nouveau.
• Le cordon d’alimentation secteur doit être remplacé
seulement dans un centre de service compétent.
Fonctionnement
• Ne pas faire fonctionner le système acoustique
continuellement à une puissance dépassant sa
puissance d’entrée maximale.
• Si la polarité des liaisons d’enceintes n’est pas correcte,
les graves seront faibles et la position des différents
instruments de musique indistincte.
• Le contact des fils d’enceinte dénudés au niveau des
bornes de l’enceinte peut provoquer un court-circuit.
• Avant de raccorder les enceintes, éteignez
l’amplificateur pour éviter d’endommager le système
acoustique.
•Les grilles des enceintes ne peuvent pas être retirées.
N’essayez pas de les enlever car les enceintes
pourraient être endommagées.
Le volume sonore ne doit pas être élevé au
point que le son en soit déformé.
Si les couleurs sur l’écran de télévision
sont anormales
Le système acoustique est isolé contre le magnétisme et
peut être installé près d’un téléviseur. Cependant, avec
certains téléviseurs, vous pourrez observer des anomalies
de couleur.
Si les couleurs sont anormales…
c Mettez le téléviseur hors tension, puis remettez-le
sous tension 15 à 30 minutes plus tard.
Si les couleurs restent anormales…
c Eloignez les enceintes du téléviseur.
Si un sifflement se produit
Repositionnez les enceintes ou réduisez le volume sur
l’amplificateur.
Emplacement
• N’installez pas les enceintes dans une position inclinée.
• N’installez pas les enceintes dans les endroits suivants :
— Extrêmement chauds ou froids
— Poussiéreux ou sales
— Très humides
— Sujets à des vibrations
— Exposés à la lumière directe du soleil
Nettoyage
Nettoyez les coffrets d’enceintes avec un chiffon doux
légèrement humidifié avec une solution détergente
neutre ou d’eau. Ne pas utiliser de tampons abrasifs, de
poudre à récurer ni de solvants, comme l’alcool ou la
benzine.
Pour toute question ou difficulté concernant votre
système acoustique, veuillez consulter votre revendeur
Sony.
Owner’s Record
The model and serial numbers are located on the
rear of the unit.  Record the serial number in the
space provided below.  Refer to them whenever
you call upon your Sony dealer regarding this
product.
Model No. SA-VE335
Serial No. 
ENERGY STAR
® 
is a U.S. registered mark.
As ENERGY STAR
® 
Partner, Sony
Corporation has determined that this
product meets the ENERGY STAR
®
guidelines for energy efficiency.
E
e
E
e
B
E
e
E
e
eE Ee
E
e
Ee
Ee
Ee
Ee
Ee
LINE IN
WOOFER OUT
FRONT
CENTER
REAR
R
R
L
L
A
Front (Right)
Avant (droite)
Center
Centre
Subwoofer
Caisson de grave
Front (Left)
Avant (gauche)
Rear (Right)
Arrière (droite)
Rear (Left)
Arrière (gauche)
Amplifier
Amplificateur
3.5 m
3,5 m
10 m
10 m
3.5 m
3,5 m
3.5 m
3,5 m
ENERGY STAR
®
 est une marque déposée
aux Etats-Unis. En tant que partenaire
d’ENERGY STAR
®
 ,Sony atteste que son
produit répond aux
recommandations d’ENERGY STAR
®
 en
matière d’économie d’énergie.