Sony SAT-A1 User Manual

Page of 92
26
Chapter 4: Using the System Features
Before You Get Started ...
Make sure you (or your DSS system installer) have completed the 
following procedures before you start using your DSS receiver:
1
Install the satellite antenna, as described in the Satellite Antenna 
Installation Manual
Note
Make certain that you (or your DSS system installer) have optimized the 
signal strength. If the signal is not optimized, you may experience losses in 
audio or video, especially during rain, snow, or other conditions that tend to 
degrade signal performance. See the Satellite Antenna Installation Manual for 
details on pointing the dish and optimizing the antenna’s signal strength.
2
Connect the satellite antenna to your DSS receiver. Then connect 
the receiver to your television and telephone line. (See Chapter 3.)
Note
Your phone line must be connected to the DSS receiver in order for you to 
purchase a pay-per-view program with the DSS remote control.
3
Make sure the access card is inserted into the DSS receiver. The 
receiver comes with the card already inserted. (See page 66 fo
details on inserting the access card.)
4
Call your program providers (DIRECTV and USSB) to activate 
your service. You’ll need to provide information, including the 
model and serial numbers of your DSS receiver and the access card 
number.
DIRECTV® 1-800-DIRECTV 
(347-3288) 
USSB 1-800-204-USSB 
(8772)
If Your System Is Not 
Completely Installed ...
See the manual that came with the satellite antenna and Chapter 3 of 
this manual for complete installation instructions. Or, see your DSS 
dealer to arrange for a professional installation or the purchase of the 
Sony-brand DSS Installation Kit.