Sony SDM-P82
8
2
Using the supplied HD15-HD15 video signal cable
(analog RGB), connect the computer to the
monitor’s HD 15 input connector (analog RGB) for
INPUT 1 or INPUT2.
(analog RGB), connect the computer to the
monitor’s HD 15 input connector (analog RGB) for
INPUT 1 or INPUT2.
Connect the computer according to the following
illustrations.
illustrations.
x
Connecting to an IBM PC/AT or
compatible computer
compatible computer
x
Connecting to a Macintosh
When connecting a Macintosh computer, use an adapter (not supplied)
if necessary. Connect the adapter to the computer before connecting the
video signal cable.
if necessary. Connect the adapter to the computer before connecting the
video signal cable.
Setup 3: Connect the power cord
1
Connect the supplied power cord to the monitor’s
AC IN connector.
AC IN connector.
2
Connect it to a power outlet.
IBM PC/AT or
compatible computer
compatible computer
to the HD 15 input
connector (analog RGB)
for INPUT1 or INPUT2
connector (analog RGB)
for INPUT1 or INPUT2
to the computer’s HD15 output
connector (analog RGB)
connector (analog RGB)
HD15-HD15 video signal
cable (analog RGB)
(supplied)
cable (analog RGB)
(supplied)
Macintosh
HD15-HD15 video signal
cable (analog RGB)
(supplied)
cable (analog RGB)
(supplied)
to the computer’s
output connector
output connector
to the HD 15 input
connector (analog RGB)
for INPUT1 or INPUT2
connector (analog RGB)
for INPUT1 or INPUT2
2
power cord (supplied)
to power outlet
1
to AC IN