Sony SDM-HS95P User Manual
19
GB
Displaying this monitor’s information
While the monitor is receiving a video signal, press and
hold the MENU button for more than 5 seconds until the
information box appears.
Press the MENU button again to make the box disappear.
hold the MENU button for more than 5 seconds until the
information box appears.
Press the MENU button again to make the box disappear.
If any problem persists, call your authorized Sony dealer and give
the following information:
• Model name: SDM-HS75P or SDM-HS95P
• Serial number
• Detailed description of the problem
• Date of purchase
• Name and specifications of your computer and graphics board
the following information:
• Model name: SDM-HS75P or SDM-HS95P
• Serial number
• Detailed description of the problem
• Date of purchase
• Name and specifications of your computer and graphics board
Picture is fuzzy
• Adjust the brightness and contrast (page 11).
• Adjust the pitch and phase (analog RGB signal only) (page 13).
• Adjust the pitch and phase (analog RGB signal only) (page 13).
x Problems caused by a computer or other equipment connected, and not
caused by the monitor
• Set the resolution to SXGA (1280
× 1024) on your computer.
Picture is ghosting
• Eliminate the use of video cable extensions and/or video switch boxes.
• Check that all plugs are firmly seated in their sockets.
• Check that all plugs are firmly seated in their sockets.
Picture is not centered or sized
properly (analog RGB signal only)
properly (analog RGB signal only)
• Adjust the pitch and phase (page 13).
• Adjust the picture position (page 13). Note that some video modes do not fill the screen to
• Adjust the picture position (page 13). Note that some video modes do not fill the screen to
the edges.
Picture is too small
x Problems caused by a computer or other equipment connected, and not
caused by the monitor
• Set the resolution to SXGA (1280
× 1024) on your computer.
Picture is dark
• Adjust the brightness (page 11).
• Adjust the backlight (page 10).
• It takes a few minutes for the display to become bright after turning on the monitor.
• When the MODE menu is set to AUTO, the display brightness may become dark in low
• Adjust the backlight (page 10).
• It takes a few minutes for the display to become bright after turning on the monitor.
• When the MODE menu is set to AUTO, the display brightness may become dark in low
Wavy or elliptical pattern (moire)
is visible
is visible
• Adjust the pitch and phase (analog RGB signal only) (page 13).
Color is not uniform
• Adjust the pitch and phase (analog RGB signal only) (page 13).
White does not look white
• Adjust the color temperature (page 11).
Monitor buttons do not operate
(
(
appears on the screen)
• If “MENU LOCK” is set to “ON”, set it to “OFF” (page 14).
The monitor turns off after a while
x Problems caused by a computer or other equipment connected, and not
caused by the monitor
• Set the computer’s power saving setting to off.
Resolution displayed on the menu
screen is incorrect
screen is incorrect
• Depending on the graphics board setting, the resolution displayed on the menu screen
may not coincide with the one set on the computer.
Symptom
Check these items
INFORMATION
MODEL : SDM-HS75P
SER . NO : 1234567
MANUFACTURED : 2004-52
SER . NO : 1234567
MANUFACTURED : 2004-52
MENU
Example
Model name
Serial number
Week and year
of manufacture
of manufacture