Sony SIR-3400H User Manual

SIR-3400H / SIR-3032i / SIR-3032W

STOP

This is stopped status.

STOP

This is the mode entered when the power for the recording unit is
turned on. Be sure to set to this mode before turning off the power.

E-E

This mode is for adjusting the range and offset while checking the

REC

signal on the screen before actual recording.

REC

This mode is for recording the data to recording media. Monitoring

REC, FWD

can also be performed at the same time.

REC-PAUSE

This mode pauses REC mode. When the pause is cancelled, the ID

REC, FWD,

is sent, and the next recording data is processed using the next ID

PAUSE

number.

FWD

This plays back the data recorded on the recording media.

FWD

FWD-PAUSE

This mode pauses the FWD mode. When the pause is cancelled,

FWD,

playback starts from the data at that point.

PAUSE

FF

This fast-forwards data playback.

FF

REW

This rewinds data playback.

REW

ID skip

This searches and plays back the start of the current or next ID block.

SEARCH

This performs a search. The following searches are available.
(See “16. Search.”)

Start ID search

This searches the ID at the start position for each recording.

ID/INDEX

This sets the ID/INDEX number and searches the start.

number search

Mark search

This searches the Mark1/Mark2 that were marked in the recording
media.

Address search

This searches designated addresses (controlled by Telnet).

Real-time clock

This searches the specified real-time clock value written on the

search

recording media (controlled by Telnet).

Manual search

This performs 16

x-speed fast-forwarding or fast-rewind.