Sony SDM-HS93 User Manual

Page of 19
19
GB
Self-diagnosis function
This monitor is equipped with a self-diagnosis function. If there is 
a problem with your monitor or computer(s), the screen will go 
blank and the 1 (power) indicator will either light up in green or 
flash orange. If the 1 (power) indicator is lit in orange, the 
computer is in power saving mode. Try pressing any key on the 
keyboard or moving the mouse.
If the picture disappears from the screen and the 
1
 (power) indicator is green
1
Turn off the 
(power) switch and disconnect the 
video signal cables from the monitor.
2
Turn the monitor on by pressing the 
(power) 
switch.
If all four color bars appear (white, red, green, blue), the monitor 
is working properly. Reconnect the video signal cables and check 
the condition of your computer(s).
If the color bars do not appear, there is a potential monitor failure. 
Inform your authorized Sony dealer of the monitor’s condition. 
If the picture disappears from the screen and the 
1
 (power) indicator is flashing orange
Press the 
1
 (power) switch twice to turn the monitor off 
and then on.
If the 1 (power) indicator lights up in green, the monitor is 
working properly.
If the 1 (power) indicator is still flashing, there is a potential 
monitor failure. Count the number of seconds between orange 
flashes of the 1 (power) indicator and inform your authorized 
Sony dealer of the monitor’s condition. Be sure to note the model 
name and serial number of your monitor. Also note the make and 
model of your computer and graphics board.
MENU
OK
1
 (power) 
indicator