Sony SDZ-S130 User Manual
Appendix
43
Hardware Reset
In case of an emergency, you can reset the unit by inserting a pointed object such
as a paper clip into the hardware reset hole.
as a paper clip into the hardware reset hole.
Caution
Resetting the unit with the hardware reset hole may cause you to lose data.
Under normal circumstances, the hardware reset is only for manufacturing or
repair purposes.
Under normal circumstances, the hardware reset is only for manufacturing or
repair purposes.
Updating the Firmware
You can update the S-AIT Tape Drive Unit firmware by downloading the new
version of the firmware to your unit through the SCSI bus. To obtain up-to-date
firmware and installation instructions, contact your dealer or visit the Sony Web
site (http://www.sony.net/Products/storagesolution/).
version of the firmware to your unit through the SCSI bus. To obtain up-to-date
firmware and installation instructions, contact your dealer or visit the Sony Web
site (http://www.sony.net/Products/storagesolution/).
Taking Care of the Unit
Safety
Power
• Only use 100 V - 240 V AC.
• Avoid plugging the unit to the same power outlet as high-current equipment
• Avoid plugging the unit to the same power outlet as high-current equipment
such as copiers or shredders.
Power Cable Precautions
• Do not crush the cable or place heavy objects on it. If the cable insulation
appears worn or broken, do not use the cable.
• Always unplug the cable by holding the plug. Never pull the cable itself as this
may break it.
• If the unit is not used for a prolonged period, unplug the cable from the power
outlet.
Hardware
reset hole
reset hole