Sony slv-d980pgi User Manual

Page of 124
2
WARNING
WARNING
To prevent fire or shock 
hazard, do not expose the 
unit to rain or moisture.
To avoid electrical shock, 
do not open the cabinet.  
Refer servicing to qualified 
personnel only.
Mains lead must only be 
changed at a qualified 
service shop.
This appliance is classified as a 
CLASS 1 LASER product.  The 
CLASS 1 LASER PRODUCT 
MARKING is located on the 
rear exterior.
CAUTION
The use of optical instruments 
with this product will increase 
eye hazard.  As the laser beam 
used in this DVD player/Video 
Cassette Recorder is harmful to 
eyes, do not attempt to 
disassemble the cabinet.
Refer servicing to qualified 
personnel only.
Notice for customers in the 
United Kingdom and 
Republic of Ireland
A moulded plug complying with 
BS1363 is fitted to this 
equipment for your safety and 
convenience.
Should the fuse in the plug 
supplied need to be replaced, a 3 
AMP fuse approved by ASTA 
or BSI to BS1362, (i.e., marked 
with 
 or 
 mark) must be 
used.
If the plug supplied with this 
equipment has a detachable fuse 
cover, be sure to attach the fuse 
cover after you change the fuse.  
Never use the plug without the 
fuse cover.  If you should lose 
the fuse cover, please contact 
your nearest Sony service 
station.
Precautions
Safety
• This unit operates on 220 – 
240 V AC, 50 Hz.  Check 
that the unit’s operating 
voltage is identical with your 
local power supply.
• To prevent fire or shock 
hazard, do not place objects 
filled with liquids, such as 
vases, on the apparatus.
• The unit is not disconnected 
from the AC power source 
(mains) as long as it is 
connected to the wall outlet, 
even if the unit itself has been 
turned off.
Installing
• Do not install the unit in a 
confined space such as a 
bookshelf or similar unit.
• Do not install the unit in an 
inclined position.  It is 
designed to be operated in a 
horizontal position only.
• Keep the unit and discs away 
from equipment with strong 
magnets, such as microwave 
ovens, or large loudspeakers.
• Do not place heavy objects 
on the unit.
• Do not place the unit on 
surfaces (rugs, blankets, etc.) 
or near materials (curtains, 
draperies) that may block the 
ventilation slots.
• If the unit is brought directly 
from a cold to a warm location, 
moisture may condense inside 
the unit and cause damage to 
the video head and tape. When 
you first install the unit, or 
when you move it from a cold 
to a warm location, wait for 
about three hours before 
operating the unit.
VIDEO Plus+ and PlusCode are 
registered trademarks of 
Gemstar Development 
Corporation.  The VIDEO Plus+ 
system is manufactured under 
license from Gemstar 
Development Corporation.
Disposal of Old Electrical 
& Electronic Equipment 
(Applicable in the 
European Union and other 
European countries with 
separate collection 
systems)
This symbol on the product or 
on its packaging indicates that 
this product shall not be treated 
as household waste. Instead it 
shall be handed over to the 
applicable collection point for 
the recycling of electrical and 
electronic equipment. By 
ensuring this product is disposed 
of correctly, you will help 
prevent potential negative 
consequences for the 
environment and human health, 
which could otherwise be 
caused by inappropriate waste 
handling of this product. The 
recycling of materials will help 
to conserve natural resources. 
For more detailed information 
about recycling of this product, 
please contact your local city 
office, your household waste 
disposal service or the shop 
where you purchased the 
product.