Sony SLV-ED60ME User Manual

Additional Operations

41

• Turn on your TV and set it to the

video channel.

• Press INPUT SELECT or PROG +/–

to display “L1”, “L2” or “L3” in the
display window.

• Press SP/LP (SP/EP) to select the tape

speed (SP or LP for the PAL system,
and SP or EP for the NTSC system).

Insert a source tape with its safety tab removed into the other
(playback) VCR. Search for the point to start playback and set it to
playback pause.

Insert a tape with its safety tab in place into this (recording) VCR.
Search for the point to start recording and press P PAUSE.

Press r REC on this VCR and set it to recording pause.

To start editing, press the P PAUSE buttons on both VCRs at the same
time.

Press the p STOP buttons on both VCRs.

Tips
• To edit more precisely, press the P PAUSE buttons on the VCRs to release pause.
• To cut out unwanted scenes while editing, press P PAUSE on this VCR when an

unwanted scene begins.  When it ends, press P PAUSE again to resume recording.

Note
• If you start recording following the procedure above, the VCR will not start

recording with the APC function. To record a tape with the APC function, press
r

 REC again during recording pause in step 3 so that the VCR analyses the tape.

Then when you start recording in step 4, press P PAUSE after the APC indicator
stops flashing.  If you press P PAUSE before the APC indicator stops flashing, the
APC function is cancelled.

P PAUSE

r REC