Sony slv-ed66me User Manual

Editing

49

• Turn on your TV and set it to the

video channel.

• Press INPUT SELECT or PROG +/–

to display “L1”, “L2” (or “L3”: SLV-
ED88ME/MJ/SG only) in the display
window.

• Press SP/LP (SP/EP) to select the tape

speed (SP or LP for the PAL system,
and SP or EP for the NTSC system).

Insert a source tape with its safety tab removed into the other
(playback) VCR. Search for the point to start playback and set it to
playback pause.

Insert a tape with its safety tab in place into this (recording) VCR.
Search for the point to start recording and press X PAUSE.

Press z REC on this VCR and set it to recording pause.

To start editing, press the X PAUSE buttons on both VCRs at the same
time.

Press the x STOP buttons on both VCRs.

Tips
• To edit more precisely, press the X PAUSE buttons on the VCRs to release pause.
• To cut out unwanted scenes while editing, press X PAUSE on this VCR when an

unwanted scene begins.  When it ends, press X PAUSE again to resume recording.

Note
• If you start recording following the procedure above, the VCR will not start

recording with the APC function. To record a tape with the APC function, press
z

 REC again during recording pause in step 3 so that the VCR analyses the tape.

Then when you start recording in step 4, press X PAUSE after the APC indicator
stops flashing.  If you press X PAUSE before the APC indicator stops flashing, the
APC function is cancelled.

X

z