Sony SLV-SE480D User Manual

Page of 92
79
Troubleshooting
Ad
diti
ona
l Inf
o
rma
tion
Additional Information
Troubleshooting
If you have any questions or problems not covered below, please consult your nearest Sony 
service facility.
Symptom
Remedy
Po
w
e
r
The ?/1 ON/STANDBY 
switch does not function.
• Connect the mains lead to the mains securely.
The power is turned on but 
the VCR does not operate.
• Moisture condensation has occurred.  Turn the power off, unplug 
the mains lead and leave the VCR to dry for over three hours.
The VCR is plugged in but 
the display window remains 
dark.
• Set POWER SAVE in the OPTIONS-2 menu to OFF (see page 
75).
Cloc
k
The clock has stopped and  
“–:– –” appears in the 
display window.
• The clock stops if the VCR is disconnected from the mains for 
more than one hour.  Reset the clock (and timer).
Pl
a
y
b
a
c
k
The playback picture does 
not appear on the TV 
screen.
• Make sure the TV is set to the video channel.  If you are using a 
monitor, set it to video input.
• If the VCR is connected to the TV with the Scart cable, make sure 
the VIDEO indicator is lit in the display window.  Use the t TV/
VIDEO button on the remote commander to light up the VIDEO 
indicator.
The picture is not clear.
• If your TV is connected to the VCR with both Scart and aerial 
cables, make sure the RF channel is set to OFF (see page 15).
• Existing broadcasts may interfere with the VCR.  Reset the RF 
channel output of your VCR.
• Adjust the tracking with the TRACKING +/– buttons.
• The video heads are dirty (see the last page of Troubleshooting).  
Clean the video heads using the Sony T-25CLD, E-25CLDR, or 
T-25CLW video head cleaning cassette.  If these cleaning cassettes 
are not available in your area, have the heads cleaned at your 
nearest Sony service facility (a standard service charge will be 
required).  Do not use a commercially available liquid type 
cleaning cassette other than Sony’s, as it may damage the video 
heads.
• The video heads may have to be replaced.  Consult your local Sony 
service facility for more information.
The picture rolls vertically 
during picture search.
• Adjust the vertical hold control on the TV or monitor.
The picture has no sound.
• The tape is defective.
• If you made A/V connections, check the audio cable connection.
continued