Sony slv-x821mk2 User Manual

Page of 113
2
-EN
Introduction
WARNING
To prevent fire or shock hazard, do not expose the unit to rain or
moisture.
To avoid electrical shock, do not open the cabinet. Refer servicing to
qualified personnel only.
Precautions
Safety
• The SLV-X842/X842ML/X821MKII operates on 110-240 V AC, 50/
60Hz.
• If anything falls into the cabinet, unplug the unit and have it checked
by qualified personnel before operating it any further.
• The unit is not disconnected from the mains as long as it is connected
to the mains outlet, even if the unit itself has been turned off.
• Unplug the unit from the mains outlet if you do not intend to use it
for an extended period of time. To disconnect the cord, pull it out by
the plug, never by the cord.
Installing
• Allow adequate air circulation to prevent internal heat buildup.
• Do not place the unit on surfaces (rugs, blankets, etc.) or near
materials (curtains, draperies) that may block the ventilation slots.
• Do not install the unit near heat sources such as radiators or air ducts,
or in a place subject to direct sunlight, excessive dust, mechanical
vibration or shock.
• Do not install the unit in an inclined position. It is designed to be
operated in a horizontal position only.
• Keep the unit and cassettes away from equipment with strong
magnets, such as microwave ovens or large loudspeakers.
• Do not place heavy objects on the unit.
• If the unit is brought directly from a cold to a warm location,
moisture may condense inside the VCR and cause damage to the
video head and tape. When you first install the unit, or when you
move it from a cold to a warm location, wait for about one hour
before operating the unit.
Caution
Television programs, films, video tapes and other materials may be
copyrighted. Unauthorized recording of such material may be contrary
to the provisions of the copyright laws. Also, use of this recorder with
cable television transmission may require authorization from the cable
television transmitter and/or program owner.