Sony SLV-SE710D User Manual
92
Specifications
Master Page : Left
filename[010ADDI.FM] model name1[SLV-SE610A/E] model name2[SLV-SE710D/E]
model name3[SLV-SX710D/E] model name4[SLV-SX717D/E]
model name5[SLV-SE810D/E] model name6[SLV-SX810D]
[3-065-674-E1 (1)]
Specifications
System
Channel coverage
PAL (B/G)
VHF E2 to E12
VHF Italian channel A to H
UHF E21 to E69
CATV S01 to S05, S1 to S20
HYPER S21 to S41
VHF E2 to E12
VHF Italian channel A to H
UHF E21 to E69
CATV S01 to S05, S1 to S20
HYPER S21 to S41
RF output signal
UHF channels 21 to 69
Aerial out
75-ohm asymmetrical aerial socket
Tape speed
SP:PAL23.39 mm/s (recording/playback)
NTSC33.35 mm/s (playback only)
LP:PAL11.70 mm/s (recording/playback)
NTSC16.67 mm/s (playback only)
EP:NTSC11.12 mm/s (playback only)
Maximum recording/playback time
10 hrs. in LP mode (with E300 tape)
Fast-forward and rewind time
Approx. 1 min. (with E180 tape)
Inputs and outputs
i LINE-1 (TV)
21-pin
Video input: pin 20
Audio input: pins 2 and 6
Video output: pin 19
Audio output: pins 1 and 3
Video input: pin 20
Audio input: pins 2 and 6
Video output: pin 19
Audio output: pins 1 and 3
DECODER/t LINE-2 IN (SLV-SE610E,
SE710D/E, SX710D/E, SX717D/E)
SE710D/E, SX710D/E, SX717D/E)
21-pin
Video input: pin 20
Audio input: pins 2 and 6
Video input: pin 20
Audio input: pins 2 and 6
DECODER/t LINE-3 IN (SLV-SE810D/E,
SX810D)
SX810D)
21-pin
Video input: pin 20
Audio input: pins 2 and 6
Video input: pin 20
Audio input: pins 2 and 6
t LINE-2 IN L o R (SLV-SE810D/E,
SX810D)
SX810D)
VIDEO IN, phono jack (1)
Input signal: 1 Vp-p, 75 ohms,
unbalanced, sync negative
AUDIO IN, phono jack (2)
Input level: 327 mVrms
Input impedance: more than 47 kilohms
Input signal: 1 Vp-p, 75 ohms,
unbalanced, sync negative
AUDIO IN, phono jack (2)
Input level: 327 mVrms
Input impedance: more than 47 kilohms
R/D L/G (SLV-SE710D/E, SX710D/E,
SX717D/E, SE810D/E, SX810D)
Phono jack (2)
Rated output level: 327 mVrms
Load impedance: 47 kilohms
Output impedance: less than 10 kilohms
Rated output level: 327 mVrms
Load impedance: 47 kilohms
Output impedance: less than 10 kilohms
General
Power requirements
220 – 240 V AC, 50 Hz
Power consumption
20 W
1.2 W (POWER SAVE is set to FULL/
ON, minimum)
1.2 W (POWER SAVE is set to FULL/
ON, minimum)
Operating temperature
5
°
C to 40
°
C
Storage temperature
–20
°
C to 60
°
C
Dimensions including projecting parts and
controls
controls
Approx. 430 × 98 × 283 mm (w/h/d) (SLV-
SE610A/E, SE710D/E, SX710D/E,
SX717D/E)
Approx. 430 × 98 × 289 mm (w/h/d)
(SLV-SE810D1/D2/E, SX810D)
SE610A/E, SE710D/E, SX710D/E,
SX717D/E)
Approx. 430 × 98 × 289 mm (w/h/d)
(SLV-SE810D1/D2/E, SX810D)
Mass
Approx. 4.1 kg
Supplied accessories
Remote commander (1)
R6 (size AA) batteries (2)
Aerial cable (1)
R6 (size AA) batteries (2)
Aerial cable (1)
Design and specifications are subject to
change without notice.
change without notice.