Sony SMPU10 User Manual
12
To control other TVs with the remote
You can control the volume, input source, and
power switch of non-Sony TVs as well.
If your TV is listed in the table below, set the
appropriate manufacturer’s code.
power switch of non-Sony TVs as well.
If your TV is listed in the table below, set the
appropriate manufacturer’s code.
b
When you replace the batteries of the remote, the
code number may be reset to the default setting. Set
the appropriate code number again.
code number may be reset to the default setting. Set
the appropriate code number again.
1
While holding down TV [/1, press the
number buttons to select your TV’s
manufacturer’s code.
number buttons to select your TV’s
manufacturer’s code.
2
Release TV [/1.
Code numbers of controllable TVs
If more than one code number is listed, try
entering them one at a time until you find the
one that works with your TV.
entering them one at a time until you find the
one that works with your TV.
Step 5: Quick Setup
Follow the steps below to make the minimum
number of basic adjustments for using the
player.
To skip an adjustment, press >. To return
to the previous adjustment, press ..
number of basic adjustments for using the
player.
To skip an adjustment, press >. To return
to the previous adjustment, press ..
1
Turn on the TV, then press [/1.
2
Switch the input selector on your
TV so that the signal from the
TV so that the signal from the
player appears on your TV screen.
“Press [ENTER] to run QUICK SETUP”
appears at the bottom of the screen. If this
message does not appear, select
“QUICK” under “SETUP” in the Control
Menu to run Quick Setup (page 18).
appears at the bottom of the screen. If this
message does not appear, select
“QUICK” under “SETUP” in the Control
Menu to run Quick Setup (page 18).
3
Press ENTER without connecting a
USB device.
The Language Setup Display appears.
4
Press X/x to select a language.
The player displays the menu and
subtitles in the selected language.
subtitles in the selected language.
5
Press ENTER.
The Screen Setup Display appears.
6
Press X/x to select the setting that
matches your TV type.
matches your TV type.
Select “16:9” or “4:3 LETTER BOX”
(page 21).
(page 21).
7
Press ENTER.
The Setup Display for selecting the type
of jack used to connect your audio
component appears.
of jack used to connect your audio
component appears.
Manufacturer
Code number
Sony
01 (default)
Hitachi
24
LG/Goldstar
76
Panasonic
17, 49
Philips
06, 08, 72
RCA
77
Samsung
71
Sharp
29
Toshiba
38