Sony SNC-DF70P User Manual
O
p
er
at
in
g t
h
h
e
C
a
a
mer
a
Recording a Still Image in the Built-in Memory of the Camera / Controlling Alarm output
20
Recording a Still Image
in the Built-in Memory of
the Camera
in the Built-in Memory of
the Camera
You can capture a camera image as a still image and
record it in the built-in memory of the camera.
To use this function, you need to make Image memory
active and to set details of the image memory in the
trigger setting menu on the Administrator menu
(page 48).
record it in the built-in memory of the camera.
To use this function, you need to make Image memory
active and to set details of the image memory in the
trigger setting menu on the Administrator menu
(page 48).
1
Monitor the image on the monitor window.
2
Select Image memory from the Trigger list box.
3
Click
Trigger
icon.
The still image of the moment when you click is
captured, and the image file is recorded in the built-
in memory of the camera.
captured, and the image file is recorded in the built-
in memory of the camera.
Controlling Alarm output
You can control the Alarm output On (short-circuit) and
Off (open).
To use this function, you need to make Alarm output
active in the Trigger setting menu on the Administrator
menu (page 48).
Off (open).
To use this function, you need to make Alarm output
active in the Trigger setting menu on the Administrator
menu (page 48).
1
Monitor the image on the monitor window.
2
Select Alarm output 1 or Alarm output 2 from the
Trigger list box.
Trigger list box.
3
Click
Trigger icon.
Each click switches the Alarm output between On
(short-circuit) and Off (open) alternately.
(short-circuit) and Off (open) alternately.
Tip
For the connection of peripheral devices to the Alarm
output of the I/O port, see the supplied Installation
Manual.
output of the I/O port, see the supplied Installation
Manual.