Sony SNC-RZ30N User Manual
Op
er
er
at
ing t
he Camer
a
Operating the Camera
12
Hold down the arrow button to move the direction of the
camera continuously.
Click
camera continuously.
Click
to return the camera to the factory-preset
default position.
Note
If the Exclusive control mode menu on the System
setting page is set to On (see page 17), the remaining
operation time is displayed instead of
setting page is set to On (see page 17), the remaining
operation time is displayed instead of
.
Panning and tilting using the tablet
When you click PT MODE, the 8-direction arrow
buttons change to a tablet. The tablet represents the
monitor image.
A click on the tablet moves the direction of the camera
so that the clicked position goes to the center of the
monitor image.
If you want to change the direction of the camera further,
click on the tablet and drag in the direction in which you
want to move the camera. The direction of the camera
moves as you drag. Hold down the button to move the
direction of the camera continuously.
buttons change to a tablet. The tablet represents the
monitor image.
A click on the tablet moves the direction of the camera
so that the clicked position goes to the center of the
monitor image.
If you want to change the direction of the camera further,
click on the tablet and drag in the direction in which you
want to move the camera. The direction of the camera
moves as you drag. Hold down the button to move the
direction of the camera continuously.
Notes
• The tablet represents the whole monitor image even
when you have trimmed the monitor image using the
Area setting menu on the Camera setting page (see
page 19).
Area setting menu on the Camera setting page (see
page 19).
• If the Exclusive control mode menu on the System
setting page is set to On (see page 17), the remaining
operation time is displayed on the lower right corner
of the tablet.
operation time is displayed on the lower right corner
of the tablet.
Zooming
CIick to zoom in.
Click to zoom out.
When the Zoom mode menu on the Camera setting page
is set to Optical only, clicking this button operates the
electronic ×2 zoom.
The button name changes to DZOOM x 1.
is set to Optical only, clicking this button operates the
electronic ×2 zoom.
The button name changes to DZOOM x 1.
When the Zoom mode menu on the Camera setting page
is set to Optical only, this button is displayed while the
electronic ×2 zoom is operating. Clicking this button
cancels the electronic ×2 zoom.
The button name changes to DZOOM x 2.
is set to Optical only, this button is displayed while the
electronic ×2 zoom is operating. Clicking this button
cancels the electronic ×2 zoom.
The button name changes to DZOOM x 2.
About the zoom range
When the Zoom mode menu on the Camera setting page
is set to Full (see page 20), you can operate high-
magnification zoom, optical zoom of × 25 and electronic
zoom of × 12, giving × 300 in total. The electronic zoom
will operate after the optical zoom.
When the Zoom mode menu is set to Optical only, only
optical zoom of × 25 can operate. In this case, you can
use an electronic zoom of × 2 by clicking the DZOOM
x 2 button. To cancel the electronic zoom, click
DZOOM x 1.
is set to Full (see page 20), you can operate high-
magnification zoom, optical zoom of × 25 and electronic
zoom of × 12, giving × 300 in total. The electronic zoom
will operate after the optical zoom.
When the Zoom mode menu is set to Optical only, only
optical zoom of × 25 can operate. In this case, you can
use an electronic zoom of × 2 by clicking the DZOOM
x 2 button. To cancel the electronic zoom, click
DZOOM x 1.
Note
When you have changed the Zoom mode menu on the
Camera setting page, click the Control button on the
menu section to update the zoom mode setting on the
image control section.
Camera setting page, click the Control button on the
menu section to update the zoom mode setting on the
image control section.
Focusing
When the Focus mode menu on the Camera setting page
is set to Manual (see page 20), you can adjust the focus
manually from the image control section, or adjust it
with a push of the button.
is set to Manual (see page 20), you can adjust the focus
manually from the image control section, or adjust it
with a push of the button.
Adjust the focus manually by clicking the two buttons
alternately.
alternately.
Click this button to adjust the focus instantly.
Notes
• When you have changed the Focus mode menu on the
Camera setting page, click the Control button on the
menu section to update the focus mode setting on the
image control section.
menu section to update the focus mode setting on the
image control section.
• If the NEAR, FAR and ONE PUSH AF buttons are not
displayed, click the FOCUS button on the image