Sony SNC-VL10N User Manual
Configuring the Network — Network Setting Page
18
xDSL Interface
This menu is displayed when Select Network Interface
is set to xDSL.
For setting the items in the LAN menu, see “LAN” on
page 17.
is set to xDSL.
For setting the items in the LAN menu, see “LAN” on
page 17.
Network Type
Displays the protocol being used for the xDSL
connection or PPPoE (Point-to-Point Protocol over
Ethernet).
connection or PPPoE (Point-to-Point Protocol over
Ethernet).
MAC Address
Displays the MAC address of the camera.
User ID
Type the user ID for Internet connection.
Password
Type the password for Internet connection.
Apply/Cancel/Help
PSTN Interface
This menu is displayed when Select Network Interface
is set to PSTN.
For setting the items in the LAN menu, see “LAN” on
page 17.
is set to PSTN.
For setting the items in the LAN menu, see “LAN” on
page 17.
MAC Address
Displays the MAC address of the camera.
User ID
Type the user ID for Internet connection.
Password
Type the password for Internet connection.
Phone Number
Type the telephone number of the ISP access point.
Connection Timeout For Idle Traffic
Type the duration (in seconds) so that the telephone line
is disconnected automatically if there is no data
communication during the specified duration.
is disconnected automatically if there is no data
communication during the specified duration.
Dial Tone
Select the dialing type of the telephone line: Tone or
Pulse.
Pulse.
Script Enable
Sets if a specified script is required for logging in or not.
Select Enable when you use a script; Disable when you
do not use it.
Select Enable when you use a script; Disable when you
do not use it.
Login Script
Select the login script from the drop-down list: End,
Wait For, Wait For Prompt, Send, Send CR, Send
User ID, Send Password or Delay, and type a required
script in the box on the right.
Wait For, Wait For Prompt, Send, Send CR, Send
User ID, Send Password or Delay, and type a required
script in the box on the right.
Apply/Cancel/Help