Sony SNCDH110W User Manual
CGI Command Manual
41
11.2 Exclusive camera control
Parameter
Value
InqParm
SetCGI
Ver
Note
CamCtrlRight
"on"/"off"
system
system.cgi
1.00
On or off the exclusive pan/tilt control from ActiveXviewer.
CamCtrlTime
"10"to"600"
system
system.cgi
1.00
Set period of time in seconds. A client that has the permission of pan/tilt control
can control the camera in the period.
CamMaxWaitNo
"0"to"10"
system
system.cgi
1.00
Set maximum number of the client who waits the exclusive control.
The Exclusive camera control CGI commands cannot be used with the following models.
♦ SNT-EP104/154
11.3 Date and time
Parameter
Value
InqParm
SetCGI
Ver
Note
Time
"<time>"
system
etc.cgi
1.00
Setting of local time.
GmTime
"<time>"
system
etc.cgi
1.00
Setting of GM time.
TimeZone
"<time zone>"
system
system.cgi
1.00
Setting of time zone.
DstMode
"on"/"off"
system
system.cgi
1.00
Enable or disable summer time (daylight saving time).
DateFormat
"ymd"/"mdy"/"dmy"
system
system.cgi
1.00
ymd : yyyy-mm-dd mdy : mm-dd-yyyy dmy : dd-mm-yyyy
NtpService
"on"/"off"
system
system.cgi
1.00
Synchronization with NTP server
NtpSrvAdd
"conf"/"dhcp"/"multi"
system
system.cgi
1.00
Setting of NTP server address,
conf : manual (max. 3)
dhcp : get from the DHCP/DHCPv6 server
multi : use multicast address
NtpServer
"<server>"
system
system.cgi
1.00
Up to 64 characters.
NtpServer2
"<server>"
system
system.cgi
1.00
Up to 64 characters.
NtpServer3
"<server>"
system
system.cgi
1.00
Up to 64 characters.