Sony SRW-5500 User Manual
109
5-4 Playback
Chap
ter
5
5
Rec
o
rd
ing/
Pla
y
b
a
c
k
5-4 Playback
There are four types of playback:
• Normal-speed playback
• Jog/Shuttle/Variable mode playback
• Capstan override playback
• DMC (Dynamic Motion Control) playback
• Normal-speed playback
• Jog/Shuttle/Variable mode playback
• Capstan override playback
• DMC (Dynamic Motion Control) playback
5-4-1 Normal-Speed Playback
Follow the procedure below to play back at normal speed.
1
Insert a cassette.
For details on inserting a cassette, see “3-3-2
Inserting and Ejecting Cassettes” on page 34.
Inserting and Ejecting Cassettes” on page 34.
2
Press the PLAY button.
Playback starts and the SERVO indicator lights up to
indicate that the servo is locked.
indicate that the servo is locked.
3
Press the STOP button to stop playback.
If playback continues to the end of the tape
If the VTR SETUP menu item 407 “AUTO REWIND” is
set to “on”, then the tape automatically rewinds to the
beginning and stops.
If the VTR SETUP menu item 407 “AUTO REWIND” is
set to “on”, then the tape automatically rewinds to the
beginning and stops.
5-4-2 Variable Speed Playback
In Jog/Shuttle/Variable modes, you can change the
playback speed as follows:
Jog mode: The playback speed corresponds to the
playback speed as follows:
Jog mode: The playback speed corresponds to the
rotational speed of the search dial, ranging from –1 to
+1 or –2 to +2 times normal playback speed (for
Digital Betacam playback, ±3 times normal speed).
+1 or –2 to +2 times normal playback speed (for
Digital Betacam playback, ±3 times normal speed).
(The speed setting can be changed using the VTR
SETUP menu item 107 “JOG DIAL RESPONSE”.)
SETUP menu item 107 “JOG DIAL RESPONSE”.)
Shuttle mode: The playback speed corresponds to the
angle of rotation of the search dial. The playback
speed is different depending on the frame frequency
of the unit. The search dial clicks at the positions for
still-picture and ±10 times normal speed playback.
speed is different depending on the frame frequency
of the unit. The search dial clicks at the positions for
still-picture and ±10 times normal speed playback.
Variable mode: Playback speed is –1 times normal speed
when the search dial is rotated fully
counterclockwise, and +2 times normal speed (for
Digital Betacam playback, –1 to +3 times normal
speed) when rotated clockwise.
counterclockwise, and +2 times normal speed (for
Digital Betacam playback, –1 to +3 times normal
speed) when rotated clockwise.
Jog mode playback
Follow the procedure below to play back in jog mode.
1
Press the JOG button, turning it on.
The VTR enters still-picture mode.
2
Rotate the search dial in the desired playback direction
and to the desired angle.
and to the desired angle.
The tape is played back slowly, at a speed
corresponding to the rotational speed of the search
dial. A direction indicator (b or B) lights up to
indicate the direction of playback.
corresponding to the rotational speed of the search
dial. A direction indicator (b or B) lights up to
indicate the direction of playback.
3
Stop rotating the search dial to stop jog mode
playback.
playback.
The indicator lights up.
1 2
3 2
Frame
frequency
frequency
Playback
speed
(HDCAM-SR)
speed
(HDCAM-SR)
Playback
speed
(HDCAM)
speed
(HDCAM)
Playback
speed (D-
BETACAM)
speed (D-
BETACAM)
23.98/24 Hz Ranging from
–50 to +50
Ranging from
–60 to +60
–60 to +60
25 Hz
Ranging from
–48 to +48
–48 to +48
Ranging from
–58 to +58
–58 to +58
Ranging from
–58 to +58
–58 to +58
29.97/30 Hz Ranging from
–40 to +40
Ranging from
–50 to +50
–50 to +50
Ranging from
–50 to +50
–50 to +50
1,2,3
1