Sony srs-a35 User Manual

SRS-A35/PC35 3-862-085-11 ES(1)

SRS-A35/PC35 3-862-085-11 ES(1)

3-862-085-11 (1)

• Operate the system only on 9 V DC.

For AC operation, use only the supplied AC power
adaptor.  Do not use any other AC power adaptor.

• After operating the system with the AC power

adaptor, disconnect the AC power adaptor from the
wall outlet if the system is not to be used for an
extended period of time.   The POWER switch on
the system does not turn the AC power adaptor off.

• If the system is not to be used for a long period of

time or is to be operated extensively on AC power,
remove the batteries to avoid damage caused by
battery leakage and corrosion.

• Do not open the cabinet.  Refer servicing to

qualified personnel only.

• Do not leave the system in a location near heat

sources, or in a place subject to direct sunlight,
excessive dust, moisture, rain or mechanical shock.

• Should any solid object or liquid fall into the

system, remove the batteries and have the system
checked by qualified personnel before operating it
any further.

• Do not use alcohol, benzine or thinner to clean the

cabinet.

• Although this system is magnetically shielded, do

not leave recorded tapes, watches, personal credit
cards or floppy disks using magnetic coding in
front of the system for an extended period of time.

Although this system is magnetically shielded, there
may be cases that the picture on some TV sets/
personal computer sets may become magnetically
distorted.  In such a case, turn off the power of the TV
set/personal computer set once, and after 15 to 30
minutes turn it on again.  For the personal computer
set, take the appropriate measures such as data
storage before turning it off.
When there seems to be no improvement, locate
the system further away from the TV set/personal
computer set.  Furthermore, be sure not to place
objects in which magnets are attached or used near
the TV set/personal computer set, such as audio
racks, TV stands, toys etc. These may cause magnetic
distortion to the picture due to their interaction with
the system.

If you have any questions or problems concerning
your system that are not covered in this manual,
please consult your nearest Sony dealer.

The model number is located on the front of the unit
and the serial number is located inside the battery
compartment.   Record the model number and the
serial number in the space provided below.  Refer to
them whenever you call upon your Sony dealer
regarding this product.

Model No.
Serial No. 

Amplifier section
Power output

3 W + 3 W  10% THD,
500 Hz – 1 kHz, 8 ohms
using with the supplied AC power
adaptor

Input impedance

4.7 kilohms (at 1 kHz)

Speaker section
System

Full-range bass reflex type

Speaker unit

Full-range (magnetically shielded):
ø 57 mm (2 

1

/

4

 in.)

Nominal impedance

8 ohms (OFF/DIRECT)

Rated input power

3 W (OFF/DIRECT)

General
Power requirement

DC 9 V, six size AA (R6) batteries (left
speaker only)

Inputs

Input cord
SRS-A35

left: stereo miniplug (1.0 m)
right: monaural miniplug (1.0 m)

SRS-PC35

left: stereo miniplug (2.0 m)
right: monaural miniplug (1.5 m)

Sony Corporation © 1998  

Printed in Philippines

Operating Instructions

Before operating the unit, please read this manual
thoroughly and retain it for future reference.

Manual de instrucciones

Antes de utilizar la unidad, lea este manual
detenidamente y consérvelo para futuras referencias.

Battery life (at 5 mW + 5 mW output)

Approx. 7 hours with Sony batteries
R6P (SR),
Approx. 24 hours with Sony alkaline
batteries LR6 (SG)

Dimensions

Approx. 95 

×

 185 

×

 125 mm (w/h/d)

(3 

3

/

4

 

×

 7 

3

/

8

 

×

 5 in.)

Mass

Left speaker: Approx. 440 g
(16.0 oz.), Right speaker: Approx.
360 g (13.0 oz.) not incl. batteries

Supplied accessory

AC power adaptor (1)

Optional accessories

Plug adaptor PC-236HG
Connecting cord RK-G138HG

Design and specifications are subject to change without
notice.

The Sony SRS-A35/PC35 is a compact-size speaker
system with a built-in power amplifier.  This system
can be connected to a Discman, WALKMAN

∗

headphone stereo, personal computer, etc.
• The magnetically shielded speakers should have

little effect on a TV screen or recorded tapes, etc.
when placed close to them.

• MEGA BASS, IBB (Intelligent Bass Boost) circuit

enables you to obtain powerful bass, regardless of
the sound volume.

• Power output of 3 W + 3 W
• The “dynamic sound duct” assures a rich and

powerful bass.

∗

WALKMAN is a registered trademark of Sony
Corporation.

Connect the left speaker to the source equipment.

When the system is connected to a monaural jack of a
radio, etc., the sound may only come through the left
speaker.  In such a case, use the optional Sony plug
adaptor PC-236HG.
The sound will come through both speakers.

Use the optional Sony RK-G138HG connecting cord.

When the AC power adaptor is connected to the
system, internal batteries are automatically
disconnected.

Use only the supplied AC power adaptor.  Do not use
any other AC power adaptor.

When the batteries are weak, the POWER indicator
will start flickering and become faint, or the playback
sound will be distorted or unstable.
In such a case, replace all the batteries with new ones.
For battery life, see “Specifications”.

Remove the batteries as illustrated.

Set the POWER switch (

ø OFF/DIRECT).  In this

case, the VOLUME control does not operate.  Adjust
the volume with the connected equipment.

Ø ON).

The POWER indicator lights up.

Turn off the MEGA BASS (Walkman, Discman, etc.)
function as it may cause sound distortion.

After listening, press the POWER switch (

ø OFF/

DIRECT).
The POWER indicator goes off.

∗

∗