Sony ss-cnp700 User Manual
47
US
F:\Sony SEM
HA\Revision2_DDW700\J906XXXX_26614591212DDW700_US\2661459122\050AMP_HT-
DDW700_UCA.fm
HA\Revision2_DDW700\J906XXXX_26614591212DDW700_US\2661459122\050AMP_HT-
DDW700_UCA.fm
masterpage: Right
HT-DDW700
2-661-459-12 (2)
Other Oper
ation
Switching the audio input
mode
mode
(INPUT MODE)
You can select the audio input mode by setting
the audio input mode when you connect
components to both digital and analog audio
input jacks on the receiver.
the audio input mode when you connect
components to both digital and analog audio
input jacks on the receiver.
1
Turn INPUT SELECTOR on the
receiver to select the input.
receiver to select the input.
You can also use the input buttons on the
remote.
remote.
2
Press INPUT MODE repeatedly
on the receiver to select the
audio input mode.
on the receiver to select the
audio input mode.
The selected audio input mode appears on
the display.
the display.
Audio input modes
• AUTO IN
Gives priority to digital audio signals when
there are both digital and analog
connections. If there are no digital audio
signals, analog audio signals are selected.
there are both digital and analog
connections. If there are no digital audio
signals, analog audio signals are selected.
• COAX IN
Specifies the digital audio signals input to
the DIGITAL COAXIAL jack.
the DIGITAL COAXIAL jack.
• OPT IN
Specifies the digital audio signals input to
the DIGITAL OPTICAL jack.
the DIGITAL OPTICAL jack.
• ANALOG
Specifies the analog audio signals input to
the AUDIO IN (L/R) jacks.
the AUDIO IN (L/R) jacks.
Note
Some audio input modes may not be set up
depending on the input.
depending on the input.
Naming inputs
You can enter a name of up to 8 characters for
inputs and display it on the receiver’s display.
This is convenient for labeling the jacks with
the names of the connected components.
inputs and display it on the receiver’s display.
This is convenient for labeling the jacks with
the names of the connected components.
1
Press the input button to select
the input you want to create an
index name for.
the input you want to create an
index name for.
You can also use INPUT SELECTOR on
the receiver.
the receiver.
2
Press AMP MENU.
“1-LEVEL” appears on the display.
3
Press control button
V/v
repeatedly to select “5-AUDIO”.
4
Press the control button or
control button
control button
b to enter the
menu.
5
Press control button
V/v to
select “NAME IN”.
6
Press the control button or
control button
control button
b to enter the
parameter.
The cursor flashes and you can select a
character. Follow the procedure given in
“To create an index name” (page 46).
character. Follow the procedure given in
“To create an index name” (page 46).
To return to the previous display
Press control button
B.
Other Operation
010COV_HT-DDW700_UCA.book Page 47 Friday, January 13, 2006 3:36 PM