Sony ST27A User Manual

1

Remove the back cover, then pull out the SIM card holder from the side of the

phone.

2

Place the SIM card into the SIM card holder, with the contacts facing up.

3

Insert the SIM card and holder into the phone.

To insert a memory card

1

Remove the back cover from the phone.

2

To remove the memory card slot cover, insert a fingernail into the gap between

the memory card slot cover and the headset connector, then pull out the cover.

3

Insert the memory card into the memory card slot with the gold-coloured

contacts facing up.

4

Using the edge of a SIM card or other similarly sized card, push the memory

card further into the slot until you hear a locking sound.

5

Push the memory card slot cover back into position so that it is fully latched.

To attach the back cover

1

Place the back cover over the back of the phone, then fit it into the slots.

2

Slide the cover towards the bottom end of the phone. You hear a sound when

the back cover locks into place.

Turning the phone on and off

To turn on the phone

Make sure that the battery is charged for at least 30 minutes before you turn on the phone for

the first time.

12

This is an Internet version of this publication. © Print only for private use.