Sony STR-DA3200ES User Manual
83
GB
T
u
n
e
r O
p
era
tions
Enter the frequency of a station directly by
using the numeric buttons.
using the numeric buttons.
1
Press TUNER repeatedly to
select the FM or AM band.
select the FM or AM band.
2
Press D.TUNING.
3
Press the numeric buttons to
enter the frequency.
enter the frequency.
Example 1: FM 102.50 MHz
Select 1
Select 1
b 0 b 2 b 5 b 0
Example 2: AM 1,350 kHz
Select 1
Select 1
b 3 b 5 b 0
4
Press ENTER.
Tip
If you have tuned in an AM station, adjust
the direction of the AM loop antenna
(aerial) for optimum reception.
If you have tuned in an AM station, adjust
the direction of the AM loop antenna
(aerial) for optimum reception.
If you cannot tune in a station
and the entered numbers flash
and the entered numbers flash
Make sure you have entered the right
frequency. If not, repeat steps 2 to 4. If you still
cannot tune in a station, the frequency is not
used in your area.
frequency. If not, repeat steps 2 to 4. If you still
cannot tune in a station, the frequency is not
used in your area.
Storing FM stations
automatically
automatically
(AUTOBETICAL)
(European model only)
This function lets you store up to 30 FM and
FM RDS stations without redundancy.
Additionally, it only stores the stations with
the clearest signals.
If you want to store FM or AM stations one by
one, see “Presetting radio stations” (page 84).
FM RDS stations without redundancy.
Additionally, it only stores the stations with
the clearest signals.
If you want to store FM or AM stations one by
one, see “Presetting radio stations” (page 84).
1
Press POWER to turn off the
receiver.
receiver.
Direct tuning
1
3
2
4
1,2
2
continued