Sony STR-DA9000ES User Manual

masterpage:Right

filename[\\Nas-data-server\SONY Current jobs\SONY STR-
DA9000ES\DTP\4249349131\424934913STR-DA9000ESUC2\GB04BSC_STR-DA9000ES-
U.fm]

 model name1[STR-DA9000ES]

 [4-249-349-13(1)]

A

 Lights up when sub woofer selection is 

set to “YES” (page 21). While this indicator 
lights up, the receiver creates a sub woofer 
signal based on the LFE signal in the disc 
being played back or the low frequency 
components of the front channels. This 
indicator does not light during the 2CH 
STEREO mode or when 2 channel signal is 
input while [A.F.D. AUTO] is selected and 
[A.F.D. 2CH SW] in the SURR SET UP menu 
is set to “OFF”.

B

 The letters 

(L, C, R, etc.) indicate the channels being 
played back. The boxes around the letters vary 
to show how the receiver downmixes the 
source sound (based on the speakers settings).
L (Front Left), R (Front Right), C (Center 
(monaural)), SL (Surround Left), SR 
(Surround Right), S (Surround (monaural or 
the surround components obtained by Pro 
Logic processing)), SBL (Surround back 
Left)*, SBR (Surround back right)*, SB 
(Surround Back (the surround back 
components obtained by 6.1 channel 
decoding))

Recording format (Front/Surround): 3/2.1

Output channel: Surround speakers absent

Sound Field: A.F.D. AUTO

* Lights up when the test tone for SBL or SBR 

signal is output.

C ; 

 Lights up when Dolby 

Digital signals are input. “EX” lights up when 
Dolby Digital EX signals are input.

D

 Lights up constantly. One of the input 

indicators also lights up according to the 
current input.

E

 Lights up when INPUT MODE is set 

to “AUTO 2CH” (page 37).

F

Lights up when an i.LINK component 

is connected.

G

 Lights up when DTS signals are 

input. “-ES” lights up when DTS-ES signals 
are input. When playing a DTS format disc, be 
sure that you have made digital connections 
and that INPUT MODE is NOT set to 
“ANALOG 2CH FIXED” (page 37).

H

 Lights up when INPUT MODE is set 

to “AUTO” and the source signal is a digital 
signal being input through the COAXIAL 
terminal, or when INPUT MODE is set to 
“COAXIAL FIXED” (page 37).

I

Lights up when INPUT MODE is set to 

“AUTO” and the source signal is a digital 
signal being input through the OPTICAL 
terminal, or when INPUT MODE is set to 
“OPTICAL FIXED” (page 37).

J

Lights up when INPUT MODE is 

set to “AUTO” and no digital signal is input to 
COAXIAL or OPTICAL jack, or when 
INPUT MODE is set to “ANALOG 2CH 
FIXED” (page 37).

K

 Lights up when “MULTI 

CH IN 1” or “MULTI CH IN 2” is selected.

L

 Lights up when sleep timer is 

activated.

M

 Lights up when dynamic range 

compression is activated (page 46).

;
;

1

2

3

9

8

7

qs

0

qa

qd

qf

qj

qk

ql

w;

wa

ws

wd

wf

wg

4

5 6

qh

qg