Sony STR-DE895 User Manual
40
GB
STR-DE995/895
4-244-963-11(1)GB
Other Operations
To insert a space
Turn the +/– (STR-DE995 only) or jog dial
(STR-DE895 only) until a blank space
appears in the display.
(STR-DE895 only) until a blank space
appears in the display.
If you’ve made a mistake
Turn MENU (STR-DE995 only) or press
/
(STR-DE895 only) until the
character to be changed flashes, then turn
the +/– (STR-DE995 only) or jog dial
(STR-DE895 only) to select the character
you want.
the +/– (STR-DE995 only) or jog dial
(STR-DE895 only) to select the character
you want.
5
Press ENTER.
6
Repeat steps 2 to 5 to assign index
name for another station or program
source.
name for another station or program
source.
Recording
Before you begin, make sure you’ve connected
all components properly.
all components properly.
Recording on an audio tape
or MiniDisc
or MiniDisc
You can record on a cassette tape or MiniDisc
using the receiver. See the operating
instructions of your cassette deck or MD deck
if you need help.
using the receiver. See the operating
instructions of your cassette deck or MD deck
if you need help.
1
Select the component to be recorded.
2
Prepare the component for playing.
For example, insert a CD into the CD
player.
player.
3
Insert a blank tape or MD into the
recording deck and adjust the
recording level, if necessary.
recording deck and adjust the
recording level, if necessary.
4
Start recording on the recording deck,
then start playback on the playback
component.
then start playback on the playback
component.
Naming preset stations
and program sources
and program sources
You can enter a name (index name) of up to 8
characters for preset stations and program
sources. These names (for example, “VHS”)
appear in the receiver’s display when a station
or program source is selected. Note that no
more than one name can be entered for each
preset station or program source.
This function is useful for distinguishing
components of the same kind. For example,
two VCRs can be specified as “VHS” and
“8MM”, respectively. It is also handy for
identifying components connected to jacks
meant for another type of component, for
example, a second CD player connected to the
MD/TAPE jacks.
characters for preset stations and program
sources. These names (for example, “VHS”)
appear in the receiver’s display when a station
or program source is selected. Note that no
more than one name can be entered for each
preset station or program source.
This function is useful for distinguishing
components of the same kind. For example,
two VCRs can be specified as “VHS” and
“8MM”, respectively. It is also handy for
identifying components connected to jacks
meant for another type of component, for
example, a second CD player connected to the
MD/TAPE jacks.
1
To name a preset station
Turn INPUT SELECTOR to select FM or
AM band, then tune in the preset
station you want to create an index
name for.
AM band, then tune in the preset
station you want to create an index
name for.
If you are not familiar with how to tune in
preset stations, see “Tuning to preset
stations” on page 38.
preset stations, see “Tuning to preset
stations” on page 38.
To name a program source
Select the program source (component)
to be named.
to be named.
2
Press MAIN MENU repeatedly to select
“
“
CUSTOMIZE
”.
3
Turn MENU (STR-DE995 only) or press
/
(STR-DE895 only) to select
“NAME? [XXXXXXXX]”.
4
Create an index name by using the +/–
(STR-DE995 only) or jog dial (STR-
DE895 only) and MENU (STR-DE995
only) or press
(STR-DE995 only) or jog dial (STR-
DE895 only) and MENU (STR-DE995
only) or press
/
(STR-DE895 only):
Turn the +/– (STR-DE995 only) or jog dial
(STR-DE895 only) to select a character,
then turn MENU (STR-DE995 only) or
press
(STR-DE895 only) to select a character,
then turn MENU (STR-DE995 only) or
press
/
(STR-DE895 only) to move
the cursor to the next position.