Sony STR-DE895 User Manual

STR-DE995/895

4-244-963-11(1)GB

You can program the remote to control non-
Sony components by changing the code. Once
the control signals have been memorized, you
can use those components as part of your
system.

Furthermore, you can also program the remote
for Sony components that the remote is unable
to control. Note that the remote can only
control components that accept infrared
wireless control signals.

Press AV ?/1 while pressing down USE
MODE.

The indicator lights and IR SET appears in
the display.

Push the scroll key/PUSH towards v or
V to select the input selector (including
TV ?/1) for the component you want to
control.

For example, if you are going to control a
CD player, select CD/SACD.

See the tables on pages 62–64 for
information on the numeric code(s)
corresponding to the component and the
maker of the component (the first digit and
the last two digits of the numeric code
correspond to the category and the maker’s
code respectively.)

Once the numeric code has been verified,
the indicator slowly flashes twice and the
remote automatically exits the programming
mode.

Set the remote command mode using the USE
MODE button and scroll key/PUSH.

You can switch the command mode (AV1 or
AV2) of the remote. If the command mode of
the receiver and the remote is different, you
cannot use the remote to operate the receiver.

Press ?/1 while pressing down USE
MODE.

Push the scroll key/PUSH towards v or
V to select “MAIN”.

Push the scroll key/PUSH towards v or
V to select “AV1” or “AV2”.

The indicator lights once (twice for AV2),
then the command mode switches. You will
be able to see your selection (AV1 or AV2)
in the display.

Press =/1, AV =/1, and MASTER VOL – at
the same time.

The indicator lights 3 times, then goes off.