Sony STR-DG300 User Manual

Page of 48
40
GB
C:\Documents and 
Settings\pc13\Desktop\JC060685_2662257111DG300_GB\2662257111\GB08REM_STR-
DG300-CEL.fm
masterpage: Left
STR-DG300
2-662-257-11 (1)
Changing button 
assignments
You can change the factory settings of the 
input buttons to suit the components in your 
system. For example, if you connect a DVD 
recorder to the VIDEO 1 jacks on the receiver, 
you can set the VIDEO 1 button on this remote 
to control the DVD recorder.
1
Hold down the input button of 
which you want to change the 
assignment.
Example: Hold down VIDEO 1.
2
Referring to the table below, 
press the corresponding button 
for the category you want.
Example: Press 4.
Now you can use the VIDEO 1 button to 
control the DVD recorder.
Categories and the 
corresponding buttons
a)
Sony VCRs are operated with a VTR 2 or VTR 3 
setting which correspond to 8 mm and VHS 
respectively.
b)
Sony DVD recorders are operated with a DVD1 or 
DVD3 setting. For details, refer to the operating 
instructions supplied with the DVD recorders.
To clear all remote button 
assignments
Press ?/1, TEST TONE and MASTER VOL – 
at the same time.
The remote is reset to its factory settings.
Using the Remote
Categories
Press
VCR (command mode VTR 3)
a)
1
VCR (command mode VTR 2)
a)
2
DVD player/DVD recorder 
(command mode DVD1)
b)
3
DVD recorder
 
(command mode DVD3)
b)
4
CD player
5
MD deck
6
Tape deck B
7
Tuner (this receiver)
8
DVR (Digital CATV terminal)
9
DSS (Digital Satellite Receiver)
0/10
GB01COV_STR-DG300-CEL.book  Page 40  Monday, May 22, 2006  7:39 AM