Sony STR-DH100 User Manual

You can record onto a MiniDisc, audio tape, 
video tape, etc. using the receiver. You can also 
add audio from a variety of audio sources 
when editing a video tape.
See the operating instructions supplied with 
your recording component.

You can also use INPUT SELECTOR on 
the receiver.

For example, insert a CD into the CD 
player.

Insert a blank MD or tape into the 
recording component.

• Sound adjustments do not affect the signal output 

from the MD/TAPE OUT jacks.

• Some sources contain copy guards to prevent 

recording. In this case, you may not be able to 
record from the source.

You can record the sound from any audio source 
onto a video tape while copying from a video tape. 
Locate the point where you want to start recording 
from another audio source, select the program 
source, then start playback. The audio from that 
source will be recorded onto the audio track of the 
video tape instead of the audio from the original 
medium. To resume audio recording from the 
original medium, select the video source again.

You can change the factory settings of the 
input buttons to suit the components in your 
system. For example, if you connect a DVD 
recorder to the VIDEO jacks on the receiver, 
you can set the VIDEO button on this remote 
to control the DVD recorder.

You cannot change the settings of TUNER and 

DMPORT buttons.

Example: Hold down VIDEO.

Example: Press 3.
Now you can use the VIDEO button to 
control the DVD recorder.