Sony STR-VA333ES User Manual

GB

Connect your speakers to the receiver. This receiver alows you to use a 7.1 channel speaker system.

To fully enjoy theater-like multi channel surround sound requires five speakers (two front speakers, a
center speaker, and two surround speakers) and a sub woofer (5.1 channel).
You can enjoy high fidelity reproduction of DVD software recorded in the Surround EX format if
you connect one additional surround back speaker (6.1 channel) or two additional surround back
speakers (7.1 channel). (See “Selecting the surround back decoding mode” on page 39.)

Since the active sub woofer does not emit highly directional signals, you can place it wherever you want.

To enjoy the best possible multi channel surround, connect speakers with a nominal impedance of
8

 

ohms or higher to the FRONT, CENTER, SURROUND and SURROUND BACK terminals, and

set the IMPEDANCE SELECTOR to “8

Ω

”. Refer to the operating instructions supplied with your

speakers if you are not sure of their impedance.  (This information is often on the back of the
speaker.)

Alternatively, you may connect speakers with nominal impedances between 4 and 8 ohms to any or
all of the speaker terminals. However, be sure to set the IMPEDANCE SELECTOR to “4

Ω

” if you

connect even one speaker with a nominal impedance between 4 and 8 ohms.

Be sure to turn the power off before adjusting the IMPEDANCE SELECTOR.

Front speaker (R)

Surround speaker (R)

Center speaker

Front speaker (L)

Surround speaker (L)

Surround back speaker (L)

Surround back speaker (R)

Active sub woofer