Sony STR-DE825 User Manual

4

This chapter describes how to connect
various audio and video components
to the receiver.  Be sure to read the
sections for the components you have
before you actually connect them to
the receiver.

Check that you received the following items with the
remote:
• FM wire antenna (1)
• AM loop antenna (1)
• Remote commander RM-LJ301 (remote) (1)
• LR6 (size-AA) alkaline batteries (3)
• Audio/video/control S connecting cord (1)
• Control S connecting cord (1)

Insert three size-AA (LR6) alkaline batteries with the +
and – properly oriented in the battery compartment.
When using the remote, point it at the remote sensor g on
the receiver.
For details, refer to the operating instructions supplied
with your remote.

z

Under normal conditions, the batteries should last for about 3
months.  When the remote no longer operates the receiver,
replace all batteries with new ones.

• Do not leave the remote in an extremely hot or humid place.
• Do not use a new battery with an old one.
• This remote is designed for use with alkaline batteries only. Do

not use a combination of different battery types.

• Do not expose the remote sensor to direct sunlight or lighting

apparatuses.  Doing so may cause a malfunction.

• If you don’t use the remote for an extended period of time,

remove the batteries to avoid possible damage from battery
leakage and corrosion.

• Turn off the power to all components before making

any connections.

• Do not connect the AC power cords until all of the

connections are completed.

• Be sure to make connections firmly to avoid hum and

noise.

• When connecting an audio/video cord, be sure to

match the color-coded pins to the appropriate jacks on
the components:  yellow (video) to yellow;  white (left,
audio) to white;  and red (right, audio) to red.